|
normal/fill valve problems
Help,
I just hooked up to water at a new CG and after a few minutes of being on the public water line with the normal/fill valve on the normal mode, water started flowing out of the city water fill port. It was as though the valve was selected to fill and it was over flowing. Tried switching the valve a couple of times, but no luck. I have a pressure regulator, fairly new, @ 45 psi, the CG pressure is 72#. I tried another new regulator, same problem. We had just come from another CG a few hours prior and didn't have any problems. This sounds like a bad valve, but before I dig into it, I thought I'd ask around to see if anyone else has had this experience.
Phil
|
Linear Mode
