|
11-14-2020, 01:08 PM
|
#1
|
Seasoned Camper
Join Date: Oct 2020
Location: Cotulla
Posts: 95
M.O.C. #27256
|
Amazing setup, but....
Hey guys and gals.
Although he is not in a Keystone product, but I watched this in total amazement at what he has done. I know its a boondocking segment and that's what it is for, but I am looking to do something like this for my Montana and not just for boondocking or dry camping, but just as a way to be prepared for anything wherever we may be. I have been comparing this set up with how Keystone Solar Flex is with the Jaboni. My rig is "prepped" for it, but I will need to know how it stands up to this guy. Many of you may have already seen this, but I will appreciate any and all comments, opinions and advice on such a system. I think it is just awesome!!
https://youtu.be/8Qn7z697GxU
|
|
|
11-14-2020, 01:34 PM
|
#2
|
Montana Master
Join Date: Feb 2020
Location: SoCal
Posts: 625
M.O.C. #25842
|
I've watched a couple of setups like that by Less Junk More Journey and Mortons On The Move. Both are far more elaborate and complex than what I'm working on.
In order stay under the 30A limit of the prep I've gone with 48V series groups wired in parallel. Currently have two four panel groups with room and wiring for one more four panel group running through a Renogy 60A MPPT charge controller.
The plan is to remove all of the outlet circuits from the power center and install them in a sub panel that's fed via a 30A circuit from the power center or a 3000W inverter controlled by a 30A transfer switch. Still collecting components as our budget will allow. I've got everything except lithium batteries and the inverter.
Basically all of the low draw circuits will run off the batteries until plugged into shore power or generator. Still have to run the generator for AC or laundry but the microwave and all the rest of the lower draw stuff will be off batteries. By comparison to some of the fancy systems it's almost analog.
__________________
2018 F350 6.7 DRW pulling a 2020 3121rl
|
|
|
11-14-2020, 03:24 PM
|
#3
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
We had seven solar pannels up there on our 2010 along with six golf cart batteries and we could pretty much do what we wanted.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
11-14-2020, 04:42 PM
|
#4
|
Montana Master
Join Date: Feb 2020
Location: SoCal
Posts: 625
M.O.C. #25842
|
Quote:
Originally Posted by DQDick
We had seven solar pannels up there on our 2010 along with six golf cart batteries and we could pretty much do what we wanted.
|
We got started with lithiums on our class C as we only had about 1,400 lbs of CCC and a 100AH Battle Born is only about 30 lbs.
Even with a dual 12V compressor refrigerator freezer ( Isotherm Cruise 195) we could stay off the grid indefinitely with just 400 watts on the roof and two 100ah Battle Born's.
At first I found myself agonizing over power usage at sundown but soon discovered that as long as the batteries were at least 13.2V at sundown we had nothing to worry about. That includes a MaxxFan running at 50% all night or the furnace set to 60 degrees when it was in the teens outside.
We've got a pretty extensive list of free "off grid" places we'd like to get back to but cannot do that until we get totally power self sufficient like we were in our C.
Our residential refrigerator is the big wild card this time. Once we get the rig setup the ROI without having to pay campground fees will be pretty quick.
__________________
2018 F350 6.7 DRW pulling a 2020 3121rl
|
|
|
11-15-2020, 12:41 PM
|
#5
|
Seasoned Camper
Join Date: Oct 2020
Location: Cotulla
Posts: 95
M.O.C. #27256
|
Quote:
Originally Posted by R.S.O'Donnell
I've watched a couple of setups like that by Less Junk More Journey and Mortons On The Move. Both are far more elaborate and complex than what I'm working on.
In order stay under the 30A limit of the prep I've gone with 48V series groups wired in parallel. Currently have two four panel groups with room and wiring for one more four panel group running through a Renogy 60A MPPT charge controller.
The plan is to remove all of the outlet circuits from the power center and install them in a sub panel that's fed via a 30A circuit from the power center or a 3000W inverter controlled by a 30A transfer switch. Still collecting components as our budget will allow. I've got everything except lithium batteries and the inverter.
Basically all of the low draw circuits will run off the batteries until plugged into shore power or generator. Still have to run the generator for AC or laundry but the microwave and all the rest of the lower draw stuff will be off batteries. By comparison to some of the fancy systems it's almost analog.
|
Man, I like that set up! I'm still researching if all that I want to do can be powered just by the solar set up, i.e. Basic living, AC when needed, Laundry and work related duties remotely.
|
|
|
11-24-2020, 11:10 AM
|
#6
|
Seasoned Camper
Join Date: Oct 2020
Location: Cotulla
Posts: 95
M.O.C. #27256
|
Can that guys setup be implemented onto my Montana? Even with the Jaboni prep on it?
|
|
|
12-23-2020, 12:05 PM
|
#7
|
Montana Master
Join Date: Mar 2012
Location: Livingston
Posts: 1,150
M.O.C. #12333
|
Here is a link to our setup which has been rocking for over a year now.....
https://ramblingrvrat.blogspot.com/2...-rats.html?m=1
__________________
Les and Sue Young, 2009 Int 4400 LP, 2020 DRV Mobile Suites [/url] https://ramblingrvrat.blogspot.com/2019/11/freedom-from-grid-rambling-rv-rats.html[/url]
|
|
|
12-24-2020, 12:05 AM
|
#8
|
Montana Master
Join Date: Jan 2017
Location: home base IL, OTR anywhere
Posts: 542
M.O.C. #19382
|
A lot of tech wizardry in the OPs linked YT vid but his 2310 CCC is concerning. Considering what he has added in solar. roughly 200lbs batteries, 100lbs of electronics, 100lbs of wiring and misc and finally 400lbs of panels = 800lbs slashed from his CCC leaving only 1510lbs for all his gear, food, other items carried onboard. But it sure is a "gee whiz "set up.
Bigboomer's set up in the DRV is awesome and he has the CCC to do the job with 8k axles carrying the weight nicely. ( you need to change your signature BTW)
__________________
2017 RAM 3500 Laramie CCLB Dually CTD Aisin, OEM auto level rear air-ride, B&W hitch
2020 3813MS Legacy Cobalt FBP, MORryde 8K IS & pinbox, PI EMS,DIY mods by in-house "craftsman", RV security system Mk1 Beagle Alerter
|
|
|
01-20-2021, 06:06 PM
|
#9
|
Montana Master
Join Date: Feb 2020
Location: SoCal
Posts: 625
M.O.C. #25842
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|