Leaf spring size for 2021 331RL with 6000 lb axles

[factquest]

My left side of my 2021 MHC 331RL is lower than the right by 1.5-2" I think it is the springs. The tires have rubbed on the bottom of the frame rail as well. I can't get camping world to call me back from service or the parts dept. I am not sure how to measure the eye to eye (A) length to confirm what size I need. I see 26", 25.25" and 24 7/8" on etrailer. I measure 26" loaded and about 25.5 lightly loaded. I have 6000lb Dexter axles, which I believe based on a keystone video has been upgraded to 3500lb leaf springs. Anyone know the correct A length or source to buy new springs? ( or other suggestions). I don't see anything cracks on the springs or anything wrong with the rest of the suspension so far. Thanks!

[rohrmann]

This is what Trekwood shows for the springs used for that axle that year. https://www.trekwood.com/products/13...g-5-Leaf-Rev-C
You should be able to order that spring from any number of suppliers.

[factquest]

Thanks Bob & Becky! Keystone upgraded to 3500 lb springs for the 6000lb axle and Trekwood has those listed when you start at the axle assembly. I am not seeing anyone else with a 26" 3500lb. Any suggestions?

[rohrmann]

Here is what they list for the 2023 model year. https://www.trekwood.com/products/15...26R-3500-Rev-B


Also, here is a better price. http://www.dexterpartsonline.com/product/072-098-00

[factquest]

Thanks So Much!!

[factquest]

I found Lippert springs for $106 each. Any opinion on Lippert vs Dexter? Or any compatibility issues? I have a Dexter Axle thanks!

[Daryles]

The Dexter Axle service manual is in the files section. It has the specs for the 3500lb leaf springs.

https://www.montanaowners.com/forums...?do=file&id=45

[Dean A Van Peursem]

Make sure your RV isn't loaded unevenly

[Cbrandt79]

Are all the hangers still attached to the frame for the springs to attach to. I experienced a similar situation and one of the wet bolts had broken loose.