|
Buffpilot, I think I know what the problem is, when they installed your landing gear they put the legs in with the adjustment holes going for and instead of side to side. This is an easy fix, just hook up to the truck and run the rear wheels of the truck up on a couple boards to elevate the the landing gear above where the inner legs will drop completely out of the outer legs. Then drop them out and rotate them 90 degrees and reinsert them. If yours is like ours there holes on all four sides of the outer legs. Just reinsert the locking pins and lower the truck. That should get the feet in the orientation you need... Dave
|
Hybrid Mode
