Prior to our second trip in our new Montana I filled the water tank until it ran out the vent. About an hour later I went to hook up to get out of town and saw a lot of water dripping out between the bottom panels. It was running out from near the front of the Monty. The front was lower than the back.
I decided to go on the trip and see what happens. Drove about 2 hour and set up to find every thing nice and dry. Tank was full and no leaks with water pump on or off.
Could the over flow have broken off, there was some water coming out of the little hole next to the fill hole when I filled the tank, or where else could the water come from? I did not allow pressure to build up in the tank.
Has anyone looked to see how the fill and vent are attached to the tank at the bottom and the white fill compartment at the top?
If there is anyone who has had a similar problem I would appreciate some feed back.
Thanks in advance for any help.