In Command is beeping

[douge61]

My in command is beeping twice the a pause the beeps twice agin. I assume this is some kind of error code but Nothing in the on line troubleshooting manual describes this. Any ideas?

[Mikendebbie]

Douge61 - there are several different versions of In Command based on the year model of your unit. It would be good if you click on UserCP (upper left of this screen) and edit your signature to show your RV model and year - then the responses from the smart folks here on forum will be more targeted to help you.

[AZ Traveler]

Originally Posted by douge61

My in command is beeping twice the a pause the beeps twice agin. I assume this is some kind of error code but Nothing in the on line troubleshooting manual describes this. Any ideas?

Doug,

Recommend you take all power off your rig including disconnecting your batteries. It may reset the issue you have.

[M&M]

Try Resetting
1) Press and hold the Power Button until the display gives you an option on screen to ​Power Off​ - press this.
2) Once the display is completely black, exit the vehicle and find the BCM.
3) Remove the cover of the BCM to expose the green board.
4) Press and hold the Reset button for 2 Seconds and let go.
5) Press and hold the Power button until the display shows light.

Step 1 and 5 is like a reboot. Try that next time. If that doesn’t work, then try the reset on the board.