|
04-06-2020, 10:10 AM
|
#1
|
Montana Fan
Join Date: Aug 2014
Location: On the Road
Posts: 166
M.O.C. #14645
|
Boxed end tables
We have a 2020 3931FB, although I'm sure that several other floor plans are identical in this area. On each end of the sofa are built-in end tables that are actually boxes similar to the cabinets. Have any of you opened these to utilize as storage? I can not find any exposed mounting screws or figure out how they are installed. I know that a lot of the internal construction is done before the side walls are installed so this may not be practical without risking significant cosmetic damage.
__________________
Retired FULLTIMERS that Travel & Work -- 2020 3931FB Legacy Edition -- OEM Sailun S637T's -- 2017 F350 DRW, 4.10 axle, 6.7L -- PullRite OE Puck Super-5th 25K hitch -- Dish Network w/ Winegard G2 automatic portable antenna -- 50A Surge Guard portable -- WiFi Ranger Elite -- Blue Streak -- YourBestAddress.com -- RVSA Certified Technician -- The UnBeetable Experience
|
|
|
04-06-2020, 12:25 PM
|
#2
|
Montana Fan
Join Date: Oct 2017
Location: Fulton
Posts: 456
M.O.C. #20688
|
Probably set down over a nailer board on the floor then the crazy guy with air nailer went to work!
__________________
Wayne & Malinda
2018 Montana 3731FL
MORryde IS/DiscBrakes
2017 F450 DRW KR 4x4
|
|
|
04-06-2020, 02:44 PM
|
#3
|
Montana Master
Join Date: Jan 2018
Location: Austin
Posts: 2,429
M.O.C. #21044
|
Those things are tiny in my 2018 3921FB...maybe 6” wide x same length as the couch width...not much usable space. Maybe they made those bigger in the newer models ( but the couch would have to be smaller than our couch)
__________________
MikenDebbie Aggie ‘77 in the sticks near Austin TX
2019 Chevy 3500 High Country DRW
2018 Montana 3921FB
Aussie Gus + Texas Heeler Jimmy
|
|
|
04-06-2020, 08:00 PM
|
#4
|
Montana Master
Join Date: Jun 2018
Location: Carson City
Posts: 2,017
M.O.C. #21963
|
I had the same thought about those boxes. At least make a magazine space out of one of them. Exploring that is on my list now that I finally have factory defects beat down.
__________________
2016 3160, Legacy, Sailuns, Splendide 2100 xc vented, 1 1/2" axle lift blocks, disk brakes. 2014 Ram 3500 SRW SWB 4X4 6.7 Aisin Mega Cab, EBC slotted disks and brakes, Titan fuel tank.
|
|
|
04-06-2020, 08:40 PM
|
#5
|
Montana Fan
Join Date: Aug 2014
Location: On the Road
Posts: 166
M.O.C. #14645
|
Yes, they are small but "hiding place" storage doesn't have to always be big. Pew Pew's and $$$ don't take up much space.
Ideally, a hinged lid.
__________________
Retired FULLTIMERS that Travel & Work -- 2020 3931FB Legacy Edition -- OEM Sailun S637T's -- 2017 F350 DRW, 4.10 axle, 6.7L -- PullRite OE Puck Super-5th 25K hitch -- Dish Network w/ Winegard G2 automatic portable antenna -- 50A Surge Guard portable -- WiFi Ranger Elite -- Blue Streak -- YourBestAddress.com -- RVSA Certified Technician -- The UnBeetable Experience
|
|
|
04-08-2020, 01:58 PM
|
#6
|
Montana Fan
Join Date: Mar 2020
Location: Marysville WA
Posts: 138
M.O.C. #26029
|
Anyone open them up...
|
|
|
10-07-2020, 09:02 PM
|
#7
|
Established Member
Join Date: Jun 2019
Location: Layton
Posts: 14
M.O.C. #24247
|
Sofa End Tables
This is the discussion I was looking for but didn't hear from anyone who might have removed the sofa end tables. I too had the thought of converting one or both of them to a magazine holder. I think the front of the end table is secured to the frame with brad nails but would like to hear from anyone who has removed them and then what you did to make this space usable.
|
|
|
06-25-2022, 05:53 PM
|
#8
|
New Member
Join Date: Jan 2021
Location: On the Road
Posts: 2
M.O.C. #28030
|
Following up?
Curious if anyone followed through and removed these end table boxes and what was discovered? We are in a 2021 Montana 3855BR and before I start demo on these…
|
|
|
06-25-2022, 06:04 PM
|
#9
|
Montana Master
Join Date: Jan 2018
Location: Austin
Posts: 2,429
M.O.C. #21044
|
I would be real curious what might be inside those, especially some sort of wiring or power connections. On my rig - the power cord reel is in the other side of the wall. There may not be anything in there, but I would approach demo carefully - expecting that I would find something and need to put the sidewall nicely back up.
__________________
MikenDebbie Aggie ‘77 in the sticks near Austin TX
2019 Chevy 3500 High Country DRW
2018 Montana 3921FB
Aussie Gus + Texas Heeler Jimmy
|
|
|
06-25-2022, 07:14 PM
|
#10
|
Established Member
Join Date: Jun 2019
Location: Layton
Posts: 14
M.O.C. #24247
|
End tables
I posted the original question and have not heard from anyone who has removed these end tables. I suspect there might be some tail light wiring inside the boxes but don't know until we hear how to remove them. I was thinking of opening the exposed end to make a magazine rack so some of this space would be useful.
|
|
|
06-25-2022, 07:39 PM
|
#11
|
New Member
Join Date: Jan 2021
Location: On the Road
Posts: 2
M.O.C. #28030
|
Sofa End Table Remove - Empty
For any future people wanting to know.
I removed the back of the queen sofa couch by unbolting.
*two of the four bolts actually had nuts and were tightened.
Then, pulled out the queen sofa.
*Figuring out that it was attached by one 2” screw to the floor in the middle of the sofa frame.
I removed the thin paneling on the side of the first end table with a crow bar. I wanted to preserve in case I needed to reattach.
AND…..
Nothing. 😂
Completely hollow space. No wires.
The second end table did have a pass through hose for the tank vent. (See pics)
* I did discover that we have an outlet behind the sofa that is pre-wired. Just need a receptacle installed.
All my photos added sideways. I’m not sure why, or how to fix… sorry. 🫤
|
|
|
06-25-2022, 09:15 PM
|
#12
|
Site Team
Join Date: Oct 2005
Location: Carmichael - CA
Posts: 7,384
M.O.C. #4831
|
Quote:
Originally Posted by redbrook88
........All my photos added sideways. I’m not sure why, or how to fix… sorry..... 🫤
|
Maybe this will help - Why Are My Pictures Rotated?
__________________
Carl (n Susan)
There is more to life than fuel mileage.
2012 Montana 3700RL Big Sky Package towed by a 2015 Ford F350 6.7L PSD 4WD CC LWB
|
|
|
06-26-2022, 07:21 AM
|
#13
|
Montana Fan
Join Date: Dec 2017
Location: Sharpsburg
Posts: 202
M.O.C. #20974
|
Put a horizontal piece inside and a piano hinge on the top and you have a hide it area
__________________
2023 GMC 2500 HD AT4
2018 High Country 340BH
|
|
|
06-26-2022, 08:30 AM
|
#14
|
Established Member
Join Date: Jun 2019
Location: Layton
Posts: 14
M.O.C. #24247
|
End Table Mystery
Mystery solved and it wasn't as complicated as I imagined. I will probably attempt to add an opening to the front of one or both of these boxes to add a magazine rack. Not much else you can do with this small space. Thanks for boldly going where no man has gone before and letting everyone know how these "tables" are put together. I'm sure they built the frame and glued/stapled the side on. The did the same thing with part of the dining room table that mounts to the wall. Thanks again for the info and photos.
|
|
|
06-26-2022, 09:00 AM
|
#15
|
Montana Master
Join Date: May 2019
Location: Alton
Posts: 2,708
M.O.C. #24086
|
Maybe some kind of thin roll out spice rack kind of holder coming out the front?
__________________
Daryl and Marianne,
2019 3130re 20th Anniversary Edition
2016 F350 Lariat
|
|
|
07-07-2022, 08:26 PM
|
#16
|
Established Member
Join Date: Jun 2019
Location: Layton
Posts: 14
M.O.C. #24247
|
Boxed end tables
Yes, a roll out spice rack would also work. You need to add something that is tall and thin to make good use of this unused space.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|