|
05-18-2020, 12:11 PM
|
#1
|
Montana Master
Join Date: Aug 2018
Location: Minden - NV
Posts: 501
M.O.C. #22360
|
Rear Storage - Slide out Tray Headwall
Here's a mod for those with the rear storage tray. After many times of having to partially empty and crawl into the storage tray in the back of the 3790RD to recover items that fall in front of the tray when loading, I decided it was time to fabricate a lightweight wall to keep things in check. I used a few scrap pieces of 1" angle and tube along with some hog wire fencing. I also fixed up the sidewall panels that pulled from the studs. Some items dragged the wall at the rear vertical seam and pulled it away. I added some screws to secure them panels to the aluminum studs. Those 3/4" brad nails just don't stay in place. Now I understand why they got rid of the walls in the 2020 models between the side hatch and the rear storage.
__________________
2013 F350 Lariat Ultimate CC LB
2019 3790RD
|
|
|
05-19-2020, 05:31 AM
|
#2
|
Montana Master
Join Date: Oct 2019
Location: Jacksonville
Posts: 2,140
M.O.C. #25165
|
Nice upgrade! I have had the same issue with stuff falling in our 3791RD. And just noticed the side walls coming loose as well. Will have to steal your idea.
__________________
Robert & Diana McNeal
2019 Montana Legacy 3791RD 20th Anniversary Edition
2014 F350 4x4 6.7L SRW
|
|
|
05-19-2020, 07:55 AM
|
#3
|
Seasoned Camper
Join Date: Oct 2019
Location: muskegon
Posts: 91
M.O.C. #25138
|
You mention things dragging along the side wall. Why not build the same fenced wall for the sides?
__________________
07 GMC CC LB dually LBZ, Idaho Rob EFI, DeeZee boards, 50 gal TransferFlow inbed tank
05 Mountaineer 298-RLS,
|
|
|
05-19-2020, 09:00 AM
|
#4
|
Montana Master
Join Date: Aug 2018
Location: Minden - NV
Posts: 501
M.O.C. #22360
|
Quote:
Originally Posted by Hornet28
You mention things dragging along the side wall. Why not build the same fenced wall for the sides?
|
I wasn't going to integrate a side fence in phase one, but I'm still on the fence about how I want to fab it up. I don't want to lose any width. There's 3-4 inches on each side of the tray that would be lost if I built a side fence straight up off the tray lips. I'm thinking of doing an offset to get within an inch of the wall skin. I'd only do this for 4-5 feet of the tray length since I don't want to prevent side access when the tray is extended.
__________________
2013 F350 Lariat Ultimate CC LB
2019 3790RD
|
|
|
05-20-2020, 07:45 PM
|
#5
|
Seasoned Camper
Join Date: Oct 2019
Location: muskegon
Posts: 91
M.O.C. #25138
|
Sounds like you'll soon be doing it. Great idea using an offset
__________________
07 GMC CC LB dually LBZ, Idaho Rob EFI, DeeZee boards, 50 gal TransferFlow inbed tank
05 Mountaineer 298-RLS,
|
|
|
05-20-2020, 08:52 PM
|
#6
|
Established Member
Join Date: Sep 2019
Location: Brownwood
Posts: 46
M.O.C. #24855
|
Quote:
Originally Posted by jetskier
Here's a mod for those with the rear storage tray. After many times of having to partially empty and crawl into the storage tray in the back of the 3790RD to recover items that fall in front of the tray when loading, I decided it was time to fabricate a lightweight wall to keep things in check. I used a few scrap pieces of 1" angle and tube along with some hog wire fencing. I also fixed up the sidewall panels that pulled from the studs. Some items dragged the wall at the rear vertical seam and pulled it away. I added some screws to secure them panels to the aluminum studs. Those 3/4" brad nails just don't stay in place. Now I understand why they got rid of the walls in the 2020 models between the side hatch and the rear storage.
|
This is a great idea! I have thought of constructing clothes rack for hanging off season shirts, jackets and pants. Plan to use see thru clothes bags rather than tubs. We full-time with my work.
|
|
|
05-21-2020, 04:38 AM
|
#7
|
Montana Master
Join Date: Oct 2014
Location: Hagerstown
Posts: 866
M.O.C. #16013
|
cAnt and WOn`t
Quote:
Originally Posted by RMcNeal
Nice upgrade! I have had the same issue with stuff falling in our 3791RD. And just noticed the side walls coming loose as well. Will have to steal your idea.
|
had the same problem, so I just took the tray out got to be a pain to crawl in and over stuff to disloge what was holding things up. Now I just leave a path down the middle and bungee cord stuff secure to the sides. saved 200 lbs form behind the axle to.
__________________
2018.5 3791 Rear Den Montana, on the lake no 3rd A/C, Mini Split, just do it
Electric Brakes ..... Disk Brakes, it`s the only way
F350 Ford Dually 4:10`s w/bags (payload 5595 lbs) Sumo Springs 63 gal aux tank
Reese Goosebox Mor/Ryde SRE 4000 X Factors Monroe shocks.... real smooth ride
|
|
|
05-27-2020, 02:26 PM
|
#8
|
Seasoned Camper
Join Date: Jul 2019
Location: Pahrump
Posts: 65
M.O.C. #24555
|
Our side walls came loose and being under warranty, it was fixed right. No more tiny brads
|
|
|
05-27-2020, 06:22 PM
|
#9
|
Montana Master
Join Date: May 2016
Location: Cuyahoga Falls
Posts: 699
M.O.C. #18572
|
Quote:
Originally Posted by jetskier
I wasn't going to integrate a side fence in phase one, but I'm still on the fence about how I want to fab it up. I don't want to lose any width. There's 3-4 inches on each side of the tray that would be lost if I built a side fence straight up off the tray lips. I'm thinking of doing an offset to get within an inch of the wall skin. I'd only do this for 4-5 feet of the tray length since I don't want to prevent side access when the tray is extended.
|
How about making your side fences hinged so they can fold down(outward) for full tray access ?
__________________
ATC/NAC Jerry A. Burkholder, USN (RET.)
Rule #1. The Chief is always right.
Rule #2. When in doubt, refer to rule #1.
|
|
|
05-28-2020, 11:05 AM
|
#10
|
Montana Master
Join Date: Sep 2017
Location: Willis
Posts: 896
M.O.C. #20587
|
We noticed the same issue with the side wall brads coming loose. I purchased a 1/2 Lb of screws to fix it but will not get to it for a few weeks. We only put big bulky stuff at the front so have not experienced the "falling over front lip" issue. Try to put heavy things on the right side to balance out the weight of the reefer side (port) of the kitchen.
__________________
2018 Montana 3791RD (SOLD)
2017 Ram 3500 DRW 6.7 Cummins Aisin, B&W RVK3600 (SOLD)
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|