|
08-14-2007, 12:51 PM
|
#1
|
Seasoned Camper
Join Date: Aug 2006
Location: Antioch
Posts: 80
M.O.C. #6224
|
Dually Rear Tire Pressure and Pressure Pro??
We just purchased our first dually (Ford F450 2008) and I was in the process of installing the sensors for our Pressure Pro. Well, when I got to the rear tires I was stumped. We have metal valve stems and on the rear, the outer tire valve stem points inward, and the inner valve stem points outward, in other words, the point towards each other. How does a person check the inner tire pressure? I was able to check and add air to the outer tire but can't get to the inner tire unless I take the outer tire off.
Also, it seems the only way to install the pressure pro would be to take the outer tire off? But, if I do that, then I would have to take the tire off if I ever need to add air to the rear tires.
Any suggestions on not only how to check the rear pressure but to install the pressure pro on the rear tires would be appreciated. If need be, I will just take the rear tires off if there isn't an easier way.
Thanks in advance for any info.
|
|
|
08-14-2007, 12:57 PM
|
#2
|
Montana Master
Join Date: Oct 2005
Location: Caldwell
Posts: 825
M.O.C. #4855
|
Took "BB"
{(bodaceous buttocks) our Chevy dually to Les Schwab tires and had stainless steel valve extensions put on. the inners now point out and the oters also point out. Also had the fronts done with shorter extensions. No leaks after a 2000mile trip! Works for me!!! About 95.00 to have it done, pulled tires, had steel valve stems put in also, extensions and then remounted. No charge to check air pressures and no charge for rotation of tires at anytime.
|
|
|
08-14-2007, 01:33 PM
|
#3
|
Montana Master
Join Date: Feb 2007
Location: Winfield
Posts: 7,327
M.O.C. #6846
|
If you have slots in the wheels and can reach through them, here is what I got to check the inner pressure, the only way I have found to add air is with a rubber hosed compressor type inflator. Hope this helps.
http://www.harborfreight.com/cpi/cta...emnumber=90610
Bingo
__________________
Bingo and Cathy - Our adventures begin in the hills of WV. We are blessed by our 2014 3850FL Big Sky (previous 2011 3750FL and 2007 3400RL) that we pull with a 2007 Chevy Silverado Classic DRW CC dually.
|
|
|
08-14-2007, 01:39 PM
|
#4
|
Montana Master
Join Date: Nov 2002
Location: Hartselle
Posts: 977
M.O.C. #45
|
If the rear tires are mounted right the valve stems should be 180 degrees from each other. I can air mine up without removing tires. If i understand what you are saying.
|
|
|
08-15-2007, 01:44 AM
|
#5
|
Seasoned Camper
Join Date: Aug 2006
Location: Antioch
Posts: 80
M.O.C. #6224
|
Looks like I am off to a tire store to get valve extensions for the inner tires and the valves turned around on the outer tires. I'd rather pay a little $$ then have to remove a tire every time I need to add air.
Thanks all for the info.
|
|
|
08-15-2007, 03:51 AM
|
#6
|
Montana Master
Join Date: Jan 2004
Location: St. John
Posts: 591
M.O.C. #800
|
Traveljunkie: What you need to do is get a "dual foot" air chuck and tire gauge. We had those flexible extensions on a class A MH and if you get any dirt in it and air your tires, you might blow the dirt into the valve core and it will let the air out of your tires. Had it happen.
|
|
|
08-15-2007, 06:56 AM
|
#7
|
Montana Master
Join Date: Jul 2004
Location: Manhattan
Posts: 1,144
M.O.C. #1846
|
Strongly recommend all metal valve stems be put in, especially on the rear duals. (Seems like something is always getting between the tires and most tire problems I've read about recently have been damaged rubber valve stems on the inside duals). As for the extenders, I've heard nothing but bad things about them -- even our local Montana dealer recommended against the ones that bend around -- too much length sticking out there and getting hit by road debris. On my Dodge I have to remove my wheel covers (I have the steel wheels with the 'chrome' covers as the holes in the cover are too small for my hands. But once the covers are removed my hands easily fit and I can air up either tire using a dual headed chuck. You should be able to install your transmitter/sensors easily as well.
|
|
|
08-15-2007, 07:28 AM
|
#8
|
Seasoned Camper
Join Date: Aug 2006
Location: Antioch
Posts: 80
M.O.C. #6224
|
Well, the good thing is the truck came with steel valve stems. The other good thing is after further manuevering, I was able to fit my hand between the tires and reach the valve stems and put the pressure pro sensors on. I think I will still invest in a dually tire guage. I do have a dual tire chuck on my air compressor but it is not long enough to reach through the holes to get pressure on the valve. However, now that I know I can wiggle my hand in, I might be able to get it to work with a little effort.
Thanks again for all the info.
|
|
|
08-15-2007, 05:15 PM
|
#9
|
Montana Master
Join Date: Sep 2003
Location: Sunshine
Posts: 1,445
M.O.C. #538
|
Skypilot: On my Dodge 3500 I cut out one of the slots on the wheel cover so my BIG hand would fit. No one even notices it.
|
|
|
08-16-2007, 05:05 AM
|
#10
|
Montana Master
Join Date: Jul 2004
Location: Manhattan
Posts: 1,144
M.O.C. #1846
|
Bigmurf: I may have to try that -- have been pulling the caps off for the last two trips and that is already too dang old (or it is me that is too dang old - I don't remember ! ) Thanks for the post and idea.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|