Rear Corner Trim Part Source

[AndyRonLI]

Folks,
Had a small fender bender. All is more or less repaired, but I needed to cut away about a foot of the trim that wraps around the rear corner. Trying to find a replacement.

i found this
https://pantherrvproducts.com/ap-pro...ng-black-8-ft/
Looks right, but would love some sort of cross reference from Montana itself


Its a 2019 fifth wheel. HM321MK
Any help is appreciated
Thanks
Andy

[Carl n Susan]

Who manufacturers a "2019 fifth wheel. HM321MK"? I can't find it on the Montana site.

[AndyRonLI]

Its a Montana High Country made by Keystone
A

[jsb5717]

I wasnt’ familiar with that model either. But sure enough

https://www.rvusa.com/rv-guide/2018-...-321mk-tr37525

That looks like the correct trim. The thing to pay attention to is the dimension of the side flange…they come different sizes. I believe the one you want is 3/4”. Looks like the one you found should work.

[Carl n Susan]

The "HM321MK" threw me. But when I saw it should have been "HC 321MK", I understood.