|
01-08-2021, 04:34 PM
|
#1
|
Montana Fan
Join Date: Oct 2016
Location: Marion
Posts: 115
M.O.C. #19116
|
Improper Micro wave installation
We have a 2020 HC331RL We just installed a Convection / microwave High Pointe Model EC942K6BE and removed the regular microwave Insignia model NS-OTR16SS8Q. The High Point is what Keystone is installing now. The issue on the removed unit was the exhaust fan blower was not installed correctly when it was installed. It was installed like it had a VERTICAL exhaust which it does not have. The blower was adjusted to blow the Hot Air directly to the bottom of the cabinet it was attached to. Eventually it could have caused a fire. When I installed the convection oven the blower vent has to be blowing forward and out the upper front of the unit. Picture below is of the removed microwave with blower shown in the vertical position.
|
|
|
01-08-2021, 05:04 PM
|
#2
|
Montana Master
Join Date: Apr 2017
Location: 1000 oaks
Posts: 948
M.O.C. #19630
|
Mine was installed correctly. It was made to point toward the outside vent. They did however forget to remove the silver diverter so it could actually pass the air outside. I could see the aluminium block off plate when I was opening the vent cover for the first time. Grabbed it with pliers and wrenched it out.
__________________
2011 2955RL Gen-Y Executive Kingpin
2022 GMC 2500HD Duramax/Alison
4X4 Crew Cab/Standard bed.
|
|
|
01-08-2021, 06:48 PM
|
#3
|
Montana Fan
Join Date: Oct 2017
Location: Moultrie
Posts: 250
M.O.C. #20747
|
Easy job. Remove the screws holding the aluminum fan cover and remove and reorient the fan to the back for direct exhaust out the outside vent. If the covers for the top exhaust are missing you will want cover them with aluminum duck tape. Have done this on several microwaves. The one in my rv came with the fan oriented to blow out the front which was NOT good.
__________________
Frank and Marilyn
2014 3402RL, Sailun S637/Disc Brakes
2015 F350 CC LWB SRW 6.7L PSD FX4
|
|
|
01-08-2021, 07:15 PM
|
#4
|
Montana Fan
Join Date: Oct 2016
Location: Marion
Posts: 115
M.O.C. #19116
|
The manual says to have the blowers to blow out the front Because ours does not have vents either vertical or Horizontal
|
|
|
01-08-2021, 07:25 PM
|
#5
|
Montana Fan
Join Date: Oct 2017
Location: Moultrie
Posts: 250
M.O.C. #20747
|
Your rv doesn't have a vent to the outside? That convection oven really needs to vent outside.
__________________
Frank and Marilyn
2014 3402RL, Sailun S637/Disc Brakes
2015 F350 CC LWB SRW 6.7L PSD FX4
|
|
|
01-08-2021, 07:27 PM
|
#6
|
Montana Fan
Join Date: Oct 2016
Location: Marion
Posts: 115
M.O.C. #19116
|
nope no vent for the Microwave
|
|
|
01-08-2021, 07:36 PM
|
#7
|
Montana Fan
Join Date: Oct 2017
Location: Moultrie
Posts: 250
M.O.C. #20747
|
That's probably why it came with a regular microwave. I am not familiar with your HC but would not think it would be difficult to put in a outside vent.
__________________
Frank and Marilyn
2014 3402RL, Sailun S637/Disc Brakes
2015 F350 CC LWB SRW 6.7L PSD FX4
|
|
|
01-08-2021, 07:39 PM
|
#8
|
Montana Fan
Join Date: Oct 2016
Location: Marion
Posts: 115
M.O.C. #19116
|
I am not going to punch a hole in the slide out The convection / micro wave can vent inside is fine for us. Our house has the same thing and it works fine.
|
|
|
01-09-2021, 06:23 AM
|
#9
|
Montana Master
Join Date: Oct 2017
Location: Bastrop
Posts: 2,892
M.O.C. #20753
|
ours does not vent outside. No vent to the outside was installed.
__________________
Mocha, one-eyed toothless, hurricane survivor, Pirate dog
2019 20th Anniversary Edition 3701LK
B&W 20K for Ford OEM Puck
2018 Ford F-350 Lariat CCLB PSD DRW KJ5CQH
|
|
|
01-09-2021, 06:42 AM
|
#10
|
Montana Fan
Join Date: Oct 2016
Location: Marion
Posts: 115
M.O.C. #19116
|
Here is what it should look like for a ventless installation with the blowers in this position the exhaust is ducted to blow out the front upper vents of the unit.
|
|
|
01-13-2021, 02:11 PM
|
#11
|
Montana Fan
Join Date: Aug 2020
Location: Missoula
Posts: 136
M.O.C. #26938
|
We recently replaced our Microwave/Convection with a new one. There was no outside vent for the old one. Vents to the inside through the upper grill. We've used the convection and doesn't seem to be a problem.
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Disclaimer:
This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.
All times are GMT -6. The time now is 11:19 AM.