|
|
02-21-2018, 12:29 PM
|
#1
|
Montana Master
Join Date: Apr 2016
Location: Auburn
Posts: 879
M.O.C. #18474
|
Anyone found a place to carry 2nd spare other than basement?
Think about this one guy/gals. I've carried two spares for years for the fifth wheels I've towed. Why?? Well, if you have a blow out, the other tire on the same side of the rig as the blowout now has to carry the entire weight of that side until you get it stopped, which may be several hundred feet. By then the good tire is likely to have sustained damage to it and will probably the next blowout just down the road. I've been thinking of way to put another spare on the Montana somewhere and get it out of the bed of the truck. I've researched Lippert's spare tire assembly with the winch, just like what is under there and it is reasonably priced. However, adding another tire in front of the factory one would not be doable as there is not enough room between the factory one and the rear axles, and putting one behind the factory one would drag the ground nearly everywhere. I don't want to put it forward of the rear wheels due to the breakover point of the trailer being so close to the wheels. I know some carry one in the basement and that's plausible, but I've wondered about moving the factory one over to one side and putting the other tire beside that one. I know the carrier would have to be totally redesigned to carry more weight, and the bolt on frame would have to use bigger bolts and a slightly different mounting point. Has anyone else thought about this besides me? Any other ideas??
__________________
2020 Montana 3790RD Legacy EditionOnan, TST TPMS, TrailAir pin, Discs,
2013 F350 DRW 4x4 CC LBViair 10007, Ride-Rites, Westin HDx, 12k Smittybilt
|
|
|
02-21-2018, 02:16 PM
|
#2
|
Site Team
Join Date: Sep 2017
Location: Oro Valley
Posts: 3,931
M.O.C. #20477
|
How about a mount on your bumper? Helps get pin weight down also.
__________________
Zack and Donna plus Millie and Ranger
2018 3160RL
"Life is too short to stay indoors, enjoy the ride!"
|
|
|
02-21-2018, 04:52 PM
|
#3
|
Montana Master
Join Date: Apr 2016
Location: Auburn
Posts: 879
M.O.C. #18474
|
Quote:
Originally Posted by AZ Traveler
How about a mount on your bumper? Helps get pin weight down also.
|
I thought about that but I am having a buddy(CAD drafter in machine fabrication shop) make me a mount to keep the blue tank on. It will be in the center and allow for the tank to be covered with a vinyl bag. That way I can get it out of the bed of the truck as well. However, that does bring up an idea that I might put the blue tank under the rig behind the axles and tire on the back
__________________
2020 Montana 3790RD Legacy EditionOnan, TST TPMS, TrailAir pin, Discs,
2013 F350 DRW 4x4 CC LBViair 10007, Ride-Rites, Westin HDx, 12k Smittybilt
|
|
|
02-21-2018, 06:41 PM
|
#4
|
Montana Master
Join Date: Oct 2015
Location: westminster md
Posts: 2,318
M.O.C. #17894
|
I agree that you can not be to prepared. I would not worry as much if you are running Goodyear g614 or Sailun s637 14 ply G rated tires. If you are running E rated china bombs, then you are going to need more than 2 spares. LOL
|
|
|
02-21-2018, 07:01 PM
|
#5
|
Montana Master
Join Date: Apr 2016
Location: Auburn
Posts: 879
M.O.C. #18474
|
Quote:
Originally Posted by beeje
I agree that you can not be to prepared. I would not worry as much if you are running Goodyear g614 or Sailun s637 14 ply G rated tires. If you are running E rated china bombs, then you are going to need more than 2 spares. LOL
|
That's what I've always said, but 5 weeks ago the sidewall blew on my G614..only two years old..
__________________
2020 Montana 3790RD Legacy EditionOnan, TST TPMS, TrailAir pin, Discs,
2013 F350 DRW 4x4 CC LBViair 10007, Ride-Rites, Westin HDx, 12k Smittybilt
|
|
|
02-21-2018, 09:04 PM
|
#6
|
Montana Fan
Join Date: Apr 2016
Location: Medford
Posts: 498
M.O.C. #18546
|
Have you thought about a bumper mount?
__________________
2016 Montana High Country 310RE
2020 Chevrolet Silverado 3500 HD LT CC 4x4 Duramax
|
|
|
02-21-2018, 10:23 PM
|
#7
|
Montana Master
Join Date: May 2017
Location: new caney
Posts: 1,050
M.O.C. #19873
|
Quote:
Originally Posted by beeje
I agree that you can not be to prepared. I would not worry as much if you are running Goodyear g614 or Sailun s637 14 ply G rated tires. If you are running E rated china bombs, then you are going to need more than 2 spares. LOL
|
I wouldn't worry as much about the tires as i would the wheels. I've had 2 wheels crack and cause me to have to install the spare in the last 2 years. The factory wheels on these rigs are junk so i started carrying an extra mounted spare . Yes i have the Sailuns and i have not had any problem with them in the last 4 years but anything can happenen. I recommend anyone that travels long distances with there rv to carry an extra mounted tire because it's not always easy to find an extra wheel. I carry my extra spare in the bed between the tailgate and the hitch but it will be a challenge to get another one under the rv but i am sure it can be done.
|
|
|
02-22-2018, 05:59 AM
|
#8
|
Montana Master
Join Date: Mar 2011
Location: Okeechobee
Posts: 2,150
M.O.C. #11206
|
Hi
Looking at ours I would say in front of the existing mount.
You should be able to put the tire over the axle with the back edge on the ground and use the winch arrangement to lift it up until its hangs on the cable then swing it forward over the axel.
If you ever get in a position where the axel would hit the spare I would think your problem would be much greater than hitting the spare. LOL
Phil P
__________________
2009 Montana 3665RE
2009 Duramax 3500 DRW quad cab
personal web page https:// www.sallyscoffees.com
If you get a page not available then remove the "s" after HTTP
|
|
|
02-22-2018, 07:51 AM
|
#9
|
Montana Fan
Join Date: Aug 2016
Location: Detroit
Posts: 100
M.O.C. #18932
|
Have you thought about the BAL hide a spare? I installed it and use it for the blue portable dump tank instead of a spare. It was super easy to install.
http://norcoind.com/bal/products/con...-a-spare.shtml
|
|
|
02-22-2018, 09:28 AM
|
#10
|
Montana Master
Join Date: Nov 2007
Location: Kville
Posts: 2,865
M.O.C. #7871
|
Carry it in the bed of the truck.
|
|
|
02-22-2018, 09:33 AM
|
#11
|
Montana Master
Join Date: Oct 2017
Location: Bastrop
Posts: 2,892
M.O.C. #20753
|
The BAL hide a spare comes on the HCs now
__________________
Mocha, one-eyed toothless, hurricane survivor, Pirate dog
2019 20th Anniversary Edition 3701LK
B&W 20K for Ford OEM Puck
2018 Ford F-350 Lariat CCLB PSD DRW KJ5CQH
|
|
|
02-22-2018, 09:54 AM
|
#12
|
Montana Master
Join Date: Apr 2016
Location: Auburn
Posts: 879
M.O.C. #18474
|
Quote:
Originally Posted by Phil P
Hi
Looking at ours I would say in front of the existing mount.
You should be able to put the tire over the axle with the back edge on the ground and use the winch arrangement to lift it up until its hangs on the cable then swing it forward over the axel.
If you ever get in a position where the axel would hit the spare I would think your problem would be much greater than hitting the spare. LOL
Phil P
|
Good point!
|
|
|
02-22-2018, 09:54 AM
|
#13
|
Montana Master
Join Date: Apr 2016
Location: Auburn
Posts: 879
M.O.C. #18474
|
Quote:
Originally Posted by BiigDaddy
|
Hmmm. Will have to look more into this.. thanks
|
|
|
02-22-2018, 12:58 PM
|
#14
|
Montana Fan
Join Date: Jun 2015
Location: Beloit
Posts: 283
M.O.C. #17535
|
Just a note from personal experience. Just like packing bearings, I suggest you lower your spare and put a little grease on the tubes and put something like anti-seize on the thumb - knob bolt. I now have a bolt and no thumb knob as I trashed it trying to get it off. Fortunately I was doing maintenance and not changing a china bomb.
FYI - I like the hide a spare system - guess I should change the spare to a Sailun also
__________________
Steve & Lisa
2015 Montana High Country 353 RL | Sailuns | Kodiak Disc brakes
2015 F-350 DRW Crew Cab | Reese Goosebox
Retired and Lovin’ it!
|
|
|
02-22-2018, 05:11 PM
|
#15
|
Montana Master
Join Date: Oct 2004
Location: Salem
Posts: 7,550
M.O.C. #2283
|
Quote:
Originally Posted by TLightning
Carry it in the bed of the truck.
|
I’m so lazy this is exactly what I would do.
Lynwood
|
|
|
02-22-2018, 05:56 PM
|
#16
|
Montana Master
Join Date: Jan 2016
Location: STAYTON
Posts: 1,118
M.O.C. #18157
|
put it in a garbage bag and put it under the bed upstairs?
Mark
__________________
“Hard times create strong men, strong men create good times, good times create weak men, and weak men create hard times.”
|
|
|
02-22-2018, 08:36 PM
|
#17
|
Montana Master
Join Date: Apr 2016
Location: Auburn
Posts: 879
M.O.C. #18474
|
Quote:
Originally Posted by mlh
I’m so lazy this is exactly what I would do.
Lynwood
|
Me too...just wanted to change it. Modding..it's a disease!
|
|
|
02-23-2018, 06:37 AM
|
#18
|
Montana Master
Join Date: Mar 2013
Location: Frostproof, FL USA
Posts: 2,362
M.O.C. #13272
|
I'll be perfectly honest, when we had our 2 Montana's we were full time and traveled over 40,000 miles. Had G614's on both units and a TST TPMS. I weighed the rig a couple times and maintained my psi. I carefully inspected my tires every month. Never had an issue and I would have never considered trying to haul a second spare.
Now in a DP it would be almost impossible to even have one spare. If you start hauling extra stuff where does it stop? Maybe an extra set of wheel bearings, what if one of those axles broke, better keep one of those, wouldn't want to be without a new step assembly if we lost those........
__________________
Previous: 2008 Montana 3400RL & 2014 3725RL
Current: Full Time 2022 SOB TT Toy Hauler
|
|
|
02-23-2018, 09:51 AM
|
#19
|
Site Team
Join Date: Sep 2017
Location: Oro Valley
Posts: 3,931
M.O.C. #20477
|
What is DP??
__________________
Zack and Donna plus Millie and Ranger
2018 3160RL
"Life is too short to stay indoors, enjoy the ride!"
|
|
|
02-23-2018, 10:07 AM
|
#20
|
Montana Master
Join Date: Oct 2017
Location: Trinidad, TX
Posts: 506
M.O.C. #20746
|
DP = Diesel Pusher
__________________
2018 Ram 3500 Laramie Longhorn 4X4 Dually Cummins Aisin CC LB / B&W Companion hitch
50 Gallon Transfer Flow in bed tank w/ Trax 3
2018 Montana 3121RL
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|