O ring for slide pump tank

[sneak40]

Where can i get a O ring for a 2002 2955 mont. slide pump?
Lippert said no parts are made for this pump anymore .

[Mrs. CountryGuy]

We recently had same issue, CountryGuy posted this thread, good luck.

ORING

[dieselguy]

I don't remember what kind of reservoir the early 2000's had (steel or plastic), but if the 348 o-ring doesn't seal it ... the plastic flange is cracked on the reservoir itself. If you have a Grainger, Hyspeco, or McMaster Carr dealer in your area ... any of the above should carry the o-ring (348). If the reservoir is horizontal ... place a piece of dense foam or equivilent under the outboard end in the catch pan ... it will help support the reservoir.

[Tom S.]

Any well equipped auto store like NAPA should be able to match up your old one. Possibly Lowes or Home Depot too.

[dieselguy]

Saddly in my neck of the woods ... most auto parts counter people go into brain-loc if you cannot supply the make and model of the vehicle you're working on to enter it into the computer ... Montanas aren't in their data base. Lowe's or Home Depot ... same ... all they seem to grasp is the o-rings in your faucets. Although generally high priced ... A NAPA would be handy ... used to have 3 in the Wichita area ... all 3 closed. But by Ned ... we have a Quick Trip every 3 blocks! Damn ... I'm rambling again ...