|
08-12-2019, 07:33 AM
|
#1
|
Montana Master
Join Date: Oct 2017
Location: Bastrop
Posts: 2,892
M.O.C. #20753
|
New Lippert Rodeo Theater chairs
Just got our theater chairs replaced under warranty. They are okay until you need to get our of them. DW needs to sit up a bit to find the button to push. Chair then leans forward until footrest hits the floor nearly ejecting her. After this as happened a few times, I looked underneath to see what is going on.
WOW
when fully reclined ones bottom is right at or beyond the front feet. so leaning forward to find teh switch turns the chair into a seewsaw. There is room to extend the feet forward on the chair to prevent this.
have to give DW credit she was able to not spill a drop of her wine. She does need help getting out of the chair every time it happens.
The feet dig into the floor causing marks.
I do not pity the Lippert folks at the Rally. I am not going to spare them.
Shoot she may be sparing them a lawsuit.
__________________
Mocha, one-eyed toothless, hurricane survivor, Pirate dog
2019 20th Anniversary Edition 3701LK
B&W 20K for Ford OEM Puck
2018 Ford F-350 Lariat CCLB PSD DRW KJ5CQH
|
|
|
08-12-2019, 07:40 AM
|
#2
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
One of the best things about the Rally is getting to express your opinions and over the years some things have changed because of it.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
08-12-2019, 05:08 PM
|
#3
|
Montana Master
Join Date: Aug 2018
Location: Minden - NV
Posts: 501
M.O.C. #22360
|
Quote:
Originally Posted by jeffba
Just got our theater chairs replaced under warranty.
|
What was wrong with the original recliners? I have the cup holder buttons and they don't work easily and I'd like to get mine replaced.
__________________
2013 F350 Lariat Ultimate CC LB
2019 3790RD
|
|
|
08-13-2019, 07:06 AM
|
#4
|
Montana Master
Join Date: Oct 2017
Location: Bastrop
Posts: 2,892
M.O.C. #20753
|
Yes, the cupholder buttons were difficult to operate. What was wrong with ours was the linkage would pop and the chair would shudder. It would be just a matter of time before it totally failed.
These new chairs not safe.
I will be hooked up with folks at Lippert later today. I will bring up the cup holder buttons also.
__________________
Mocha, one-eyed toothless, hurricane survivor, Pirate dog
2019 20th Anniversary Edition 3701LK
B&W 20K for Ford OEM Puck
2018 Ford F-350 Lariat CCLB PSD DRW KJ5CQH
|
|
|
08-13-2019, 07:48 AM
|
#5
|
Montana Master
Join Date: Feb 2012
Location: Lake Gaston
Posts: 8,773
M.O.C. #12156
|
An example of why like many others, we replace all OEM furniture with quality stuff, and give or donate the furniture we pull out. We justify the expense since we snowbird in Florida and spend 8 months of the year in our rigs. Our first and second Montana units had decent furniture. Not any more, the furniture provided with our 2015 was garbage, even the dining table chairs which we replaced as well.
__________________
Mike and Lorraine
2002 3655 FL, 2005 3650RK
2010 3665RE, 2015 3910FB
F350 crew cab dually 6.7
|
|
|
08-13-2019, 07:56 AM
|
#6
|
Montana Master
Join Date: Aug 2018
Location: Minden - NV
Posts: 501
M.O.C. #22360
|
Quote:
Originally Posted by jeffba
Yes, the cupholder buttons were difficult to operate. What was wrong with ours was the linkage would pop and the chair would shudder. It would be just a matter of time before it totally failed.
These new chairs not safe.
I will be hooked up with folks at Lippert later today. I will bring up the cup holder buttons also.
|
They are junk. I've had mine tip over multiple times. The side panels are bent out. Let me know what Lippert says.
|
|
|
08-20-2019, 08:14 PM
|
#7
|
New Member
Join Date: Feb 2010
Location: Lutz
Posts: 3
M.O.C. #10081
|
Quote:
Originally Posted by 1retired06
An example of why like many others, we replace all OEM furniture with quality stuff, and give or donate the furniture we pull out. We justify the expense since we snowbird in Florida and spend 8 months of the year in our rigs. Our first and second Montana units had decent furniture. Not any more, the furniture provided with our 2015 was garbage, even the dining table chairs which we replaced as well.
|
I am curious as to what replacement furniture you like. Photos?
|
|
|
09-23-2019, 05:40 AM
|
#8
|
Montana Master
Join Date: Oct 2017
Location: Bastrop
Posts: 2,892
M.O.C. #20753
|
Okay the Rodeo part of our chairs was due to the fact the replacement chairs need to be anchored to the floor. The Dealer did not do that. When DW pointed out the seat of the recliner will shift, the Lippert rep said these were the lowest level of powered recliners. For an additional cost we could upgrade them.
In the 2020's it looks like the chairs have been upgraded.
Our fix is to jus deal with them until we get home and swap them out with some reliners we had bought for our SOB TT and hald onto them as a just in case. Being a packrat has its advantages.
While not being too pleased to find out we had low end furniture in a "luxury" 5er. Both Montana and Lippert were very helpful in getting to a solution.
Side note:
At the Rally Mark Krol mentioned that they are moving to putting in better components in and letting the price increase a bit. Even at the risk of market share to put out a better product. The furniture in the 2020s do look to be an upgrade and solid wood stiles in the cabinets are now standard.
__________________
Mocha, one-eyed toothless, hurricane survivor, Pirate dog
2019 20th Anniversary Edition 3701LK
B&W 20K for Ford OEM Puck
2018 Ford F-350 Lariat CCLB PSD DRW KJ5CQH
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|