![Reply](/forums/images/mo/buttons/reply.gif) |
|
02-06-2020, 01:15 PM
|
#1
|
Montana Fan
Join Date: Mar 2017
Location: Spokane Valley
Posts: 119
M.O.C. #19510
|
Timken Bearings
Planning to swap out my bearings when I do maintenance next month. The forum has provided great information for the bearing set at etrailer, and I assumed they were Timken's because that was the recommended brand. The bearings pictured for the #7000 axels with EZ-lube (GS-2125DL) are stamped PEER, part # and China. Where do you find your Timken bearings?
__________________
2018 Montana 3810MS
2015 Chevy 3500HD
|
|
|
02-06-2020, 01:49 PM
|
#2
|
Montana Master
Join Date: Sep 2013
Location: Pensacola (mail forward service)
Posts: 3,198
M.O.C. #13740
|
Mine were from morryde. You should be able to find a source by google searches for them. Or maybe another member will chime in with their source.
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|
|
|
02-06-2020, 03:36 PM
|
#3
|
Montana Master
Join Date: Feb 2005
Location: Haysville
Posts: 4,261
M.O.C. #3085
|
I'm not going to reenter the discussion of what the brand Timken means today compared to 15 years ago as we've already beat that horse. Just be aware that not all Timken bearings are made in the US of A nowdays ... always check your bearing boxes.
|
|
|
02-06-2020, 03:51 PM
|
#4
|
Montana Fan
Join Date: Mar 2017
Location: Spokane Valley
Posts: 119
M.O.C. #19510
|
Still Searching
Understanding that they aren't always made in the USA, would it be safe that assume if it had the Timken name on it, but made in China, would still have the Timken specs? Not trying to resurge the USA/China argument, just trying to find a better bearing(s) to install on my trailer.
__________________
2018 Montana 3810MS
2015 Chevy 3500HD
|
|
|
02-06-2020, 04:02 PM
|
#5
|
Montana Master
Join Date: Feb 2005
Location: Haysville
Posts: 4,261
M.O.C. #3085
|
I'll just put this out and let others answer where they got Timkens. Corporate America does not hold as much good water as it used to concerning conformity to what it once stood for. Take a long look at Boeing right now. They knew there were issues and still produced a product ... I was a Boeing employee for years just for mentioning. Timken is a good bearing ... so is National.
|
|
|
02-06-2020, 04:11 PM
|
#6
|
Montana Master
Join Date: May 2017
Location: new caney
Posts: 1,050
M.O.C. #19873
|
Timken is a premium bearing no matter where it's made which is most likely China. The most important thing is to keep your bearings properly greased with quality high temp grease which seems to be what you are planning to do. There doesn't seem to be a huge problem with the factory bearings which are made in China but the Timken's may give you peace of mind.
|
|
|
02-06-2020, 04:34 PM
|
#7
|
Montana Master
Join Date: Oct 2012
Location: Box Elder
Posts: 4,701
M.O.C. #12947
|
If it is actually a Timken bearing, it should be high quality as Timken wouldn't risk their name on poor a quality product. That being said, there are counterfeit bearings on the market, just like a lot of products. These are links that explains what to look for. http://www.hungsenghuat.com/images/h...l_bearings.pdf
https://www.machinedesign.com/mechan...-fake-bearings
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
|
|
|
02-06-2020, 04:59 PM
|
#8
|
Montana Master
Join Date: May 2017
Location: new caney
Posts: 1,050
M.O.C. #19873
|
I found the Timkens on Amazon. The 25580 bearing with race is 24.37 and the 14125a is 19.27 with race. The reviews say these are made in the U.S.A. This is a total per wheel of 43.64 plus tax. Add about 5.00 per Dexter seal on other web sites and you will be in the neighborhood of 55.00 per wheel or 220.00 for all 4 wheels. Just add quality grease and you are in business.
|
|
|
02-06-2020, 05:55 PM
|
#9
|
Montana Master
Join Date: Dec 2017
Location: Mountain Home
Posts: 839
M.O.C. #20949
|
If you have a NAPA parts store in the area they usually have the complete Timken inner/outer race and bearing along with grease seal on hand. Common use item on many horse trailers, etc
|
|
|
02-07-2020, 05:33 AM
|
#10
|
Montana Master
Join Date: Jul 2014
Location: Upstate NY
Posts: 1,788
M.O.C. #14547
|
I usually buy Timkens from Rock Auto Parts. So far they have all said Made in USA. https://www.rockauto.com/en/catalog/. You will need to input the needed part number. Other brands such as National, SKF or Fafnir are just as good.
I did buy one from AMAZON as well for a truck, also USA made. Problem with Amazon is that there are also counterfeiters selling if you are buying one of their 'price may be lower' sellers instead of the main company
__________________
Dave W
2014 Montana High Country 343RL (Sold!)
2011 Ford 6.7 Lariat CCLB (Went to PU Heaven)
2019 F150SC XLT SE Sport,w/full tow package
|
|
|
02-07-2020, 05:59 AM
|
#11
|
Montana Master
Join Date: Jan 2016
Location: STAYTON
Posts: 1,118
M.O.C. #18157
|
Rock Auto.com had the best price for races and bearings when I did mine. It was 1/2 the cost of my local NAPA or Advance Auto.
Mark
__________________
“Hard times create strong men, strong men create good times, good times create weak men, and weak men create hard times.”
|
|
|
02-07-2020, 07:07 AM
|
#12
|
Montana Fan
Join Date: Mar 2017
Location: Spokane Valley
Posts: 119
M.O.C. #19510
|
Purchasing Bearings
Don't know why I didn't consider Rock Auto and I really like shopping with them. They had all the bearings, races and seals for about $100 cheaper than Amazon. The grease, cotter pins and lock washers will be coming from etrailer. Until I take the wheel and hub off, I won't know what kind of locking mechanism is installed on the spindle. I just know it has the EZ Lube system. I want to have the parts on hand so there's less down time. Thanks everyone for your help, tips and advice. Between doing the bearing project and replacing the black tank valve this Spring, this should be a great camping season!
__________________
2018 Montana 3810MS
2015 Chevy 3500HD
|
|
|
02-07-2020, 07:09 AM
|
#13
|
Montana Fan
Join Date: Oct 2019
Location: Louisville
Posts: 126
M.O.C. #25098
|
A word of Caution on TIMKEN bearings
I live in Canton, OH - TIMKEN World Headquarters. I support local folks, and while I agree many corps have gone sideways...I'd like to think they haven't.
I recently set out to replace the inner and outer wheel bearings and seals on my 3500 Dodge Truck.
Ordered the first set on Amazon and they came as expected the next day. Inspected the product that was sent. Certainly looked like TIMKEN...box and all.
Upon further inspection, I noticed something that was missing. All I buy is TIMKEN.
A number of years ago TIMKEN started placing heavy-duty holographic barcoded decals on thier boxes to fight against counterfeiters. There were no stickers on these boxes. ODD I thought.
Confirmed with TIMKEN that this indeed was an issue. Returned what I ordered off of Amazon and ended up getting them through a local NAPA.
Buyer B Ware!
__________________
Gordon & Victoria Hallof
Louisville, Ohio
2020 Ram 3500 HO Cummins Aisin 6 Spd
2017 3661RL
|
|
|
02-07-2020, 10:47 AM
|
#14
|
Montana Master
Join Date: Oct 2012
Location: Box Elder
Posts: 4,701
M.O.C. #12947
|
Quote:
Originally Posted by Mike3387
Don't know why I didn't consider Rock Auto and I really like shopping with them. They had all the bearings, races and seals for about $100 cheaper than Amazon. The grease, cotter pins and lock washers will be coming from etrailer. Until I take the wheel and hub off, I won't know what kind of locking mechanism is installed on the spindle. I just know it has the EZ Lube system. I want to have the parts on hand so there's less down time. Thanks everyone for your help, tips and advice. Between doing the bearing project and replacing the black tank valve this Spring, this should be a great camping season!
|
You will have the normal washer and nut, not a castle nut, and the nut is held in place by a clip that has a flat that engages the flat on the spindle and clips that grab the outside of the nut. http://www.dexterpartsonline.com/product/27-061
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
|
|
|
02-07-2020, 11:52 AM
|
#15
|
Montana Fan
Join Date: Mar 2017
Location: Spokane Valley
Posts: 119
M.O.C. #19510
|
Bearing Parts
Thank you for the confirmation and link. Just getting those parts from Dexter and the red bearing grease will save me some $$$. I'll keep them in mind for other parts I may need later.
__________________
2018 Montana 3810MS
2015 Chevy 3500HD
|
|
|
02-07-2020, 05:23 PM
|
#16
|
Montana Master
Join Date: Aug 2009
Location: Grand Rapids
Posts: 1,896
M.O.C. #9561
|
for some reason my message didn't work. timkens makes their bearing all over the world.
|
|
|
02-12-2020, 01:53 PM
|
#17
|
New Member
Join Date: Sep 2015
Location: Colbert
Posts: 2
M.O.C. #17863
|
Tim Ken Bearings
Mike, I got my bearings from Brown Bearing on Trent and Fancher.
|
|
|
02-12-2020, 01:57 PM
|
#18
|
New Member
Join Date: Sep 2015
Location: Colbert
Posts: 2
M.O.C. #17863
|
Brown Bearing on Trent and Fancher has what you need. Got mine there last summer.
|
|
|
02-12-2020, 02:26 PM
|
#19
|
Established Member
Join Date: Oct 2018
Location: Spokane
Posts: 27
M.O.C. #22958
|
Hello all,
I put inexpensive China bearings on my old 9000 pound trailer purchased at my local trailer parts supply house (not Timken bearings) and they were discolored (overheated) when I inspected them the next year, and yes they were adjusted and lubricated. I went to a local bearing supplier and got US made Timkens and didn't see that problem again with that trailer. Last spring i purchased Timken USA made bearings at the same supplier for my montana. They are out there if you ask. I am not debating US made or China made, just saying made in the USA was available last year.
__________________
Steve and Tami, Spokane Washington
Tow rig, 2012 F350 6.7 SRW
Trailer, 2011 3665RE
Dog, 2015 Black Lab
|
|
|
02-12-2020, 02:28 PM
|
#20
|
Established Member
Join Date: Oct 2018
Location: Spokane
Posts: 27
M.O.C. #22958
|
Mine were from Brown bearing also
__________________
Steve and Tami, Spokane Washington
Tow rig, 2012 F350 6.7 SRW
Trailer, 2011 3665RE
Dog, 2015 Black Lab
|
|
|
![Reply](/forums/images/mo/buttons/reply.gif) |
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|