Everpur drinking water filter

[K0LCB]

Did anyone ever install an Everpur drinking water filter? If so, how hard was it to drill a hole in the counter top? And, how did you do it?
Thanks
LC

[Ozz]

My counter-top in my 2007 3400RL was easy to drill, I just used a pilot hole then a hole saw, or the drill in the hole saw. Just make sure you have plenty of room under the counter from the edge. I drilled it for a small faucet for my Reverse Osmosis system.

Not too much room for holes under there, this is right by the existing faucet:



Hole for faucet I drilled:
https://picasaweb.google.com/Jimsue13/HoleDrilledForFaucet?authuser=0&feat=directlink

[K0LCB]

Thanks Oz,
Was you counter top Corian or whatever the synthic material used by Keystone?
Thanks
LC

[Ozz]

quote:Originally posted by LCBoyer

Thanks Oz,
Was you counter top Corian or whatever the synthic material used by Keystone?
Thanks
LC

I really don't know, it was a little like fiberglass and resin.
Probably the latter.

I noticed you like old cars and are in Pennsicola, my best pal Bob Manske goes to car shows with his old MG, he lives North in Milton