Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Montana Owners Club - Keystone Montana 5th Wheel Forum > GENERAL DISCUSSIONS > General Discussions about our Montanas
Click Here to Login

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 12-04-2013, 01:53 PM   #1
oldelmer1
Montana Master
 
Join Date: Sep 2010
Location: North East
Posts: 1,050
M.O.C. #10758
Level Up Pads

Ya'll who have level up, do you carry/use jack pads under your jacks?

If so, what kind are they, how big are they, and are they home made or store bought.

I can see where they would come in handy if camping on grass after a good rain to keep the jacks from sinking into the mud.

THANKS....
 
oldelmer1 is offline   Reply With Quote
Old 12-04-2013, 02:27 PM   #2
HOOK
Montana Master
 
Join Date: May 2011
Location: Fayetteville
Posts: 4,200
M.O.C. #11401
I carry some of the plastic stacking blocks, but haven't used them yet. Level up works well so far without them. But you never know when you might need them.
HOOK is offline   Reply With Quote
Old 12-04-2013, 02:28 PM   #3
rvgwen
Seasoned Camper
 
Join Date: Jan 2012
Location: Aransas Pass
Posts: 56
M.O.C. #12147
We use the orange ones from Walmart when we are on suspect soil such as wet,sandy or otherwise soft. The pads do provide a bigger foot print and are easy to maintain. Cost factor is another bonus...
rvgwen is offline   Reply With Quote
Old 12-04-2013, 03:33 PM   #4
rohrmann
Montana Master
 
rohrmann's Avatar
 
Join Date: Oct 2012
Location: Box Elder
Posts: 4,690
M.O.C. #12947
If you are on ground that is that soft, I would be very hesitant to park there. If you are worried about jacks sinking, you might lose to whole rig in a bog.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
rohrmann is offline   Reply With Quote
Old 12-04-2013, 04:05 PM   #5
DQDick
Site Team
 
DQDick's Avatar
 
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
We have parked where our tires went down six to eight inches and we used the yellow foot square plastic pads and they worked great. Didn't sink in hardly at all. Anytime we're on dirt we use them. No telling when it will rain enough you wish they were under there.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
DQDick is offline   Reply With Quote
Old 12-04-2013, 04:05 PM   #6
DougnDawn
Seasoned Camper
 
Join Date: Aug 2013
Location: Clarence
Posts: 53
M.O.C. #13665
I use some yellow pads the dealer threw in on the deal for the camper. I use them mainly because the campground we go to the most has gravel sites.
DougnDawn is offline   Reply With Quote
Old 12-04-2013, 04:19 PM   #7
Bigsky3625RE
Montana Fan
 
Join Date: Sep 2012
Location: Redmond
Posts: 274
M.O.C. #12815
We use 2 x 6 wood blocks under our jacks. If you ever need firewood you have it.

They are cut to about one foot long. Don't use the treated wood.
Bigsky3625RE is offline   Reply With Quote
Old 12-04-2013, 04:51 PM   #8
bobcat92
Montana Fan
 
Join Date: Sep 2012
Location: billings
Posts: 110
M.O.C. #12853
We use the oversize orange jack pads. We use them on all surfaces. http://www.campingworld.com/shopping...set-of-2/56864
bobcat92 is offline   Reply With Quote
Old 12-04-2013, 06:25 PM   #9
Artemus Gordon
Montana Master
 
Join Date: Mar 2012
Location: Redding
Posts: 1,421
M.O.C. #12339
Agree with statement above about ground being capable of supporting the trailer. This summer, I stayed at a KOA that recently installed new "gravel pull through sites"! I nearly buried my dually, and Montana when I pulled into my spot. I had to use four wheel drive to escape, I then asked for new spot. Later that evening, I was asked to pull out another camper that got stuck in his site. He unhooked and deployed leveling system on yellow pads. To add to problem, the sites sloped to the right. His SOB Trailer could not level itself and landing gear ended up sinking nearly a foot. I was asked to help tow fiver, and his single rear drive truck out using my 4x4 ! I ended up placing his level system in manual mode, to even get all the back gear up. Error messages etc. In this case he had put pads under back four feet. The trailer actually "Skated sideways" on the wider foot prints, sinking deeper into gravel. Therefore, I believe pads can be used, but if ground too soft, or soft and un level, you better consider moving ! Yes unusual circumstances, but I have heard of "movement of leveling feet" when placed on pads ! Perhaps caused by our mini earthquakes? Lol
Artemus Gordon is offline   Reply With Quote
Old 12-05-2013, 12:52 AM   #10
DonandBonnie
Montana Master
 
Join Date: Jun 2006
Location: Madison
Posts: 1,239
M.O.C. #5906
We bought pressure treated 2x8's and cut them into 2 ft. lengths. When not in use they ride in the bed of the truck. The 2 ft. length helps spread the weight to minimize the settling in softer ground. They serve another purpose beside support. In a couple campgrounds that are not level, we have had the auto level fail due to not enough travel on the jack to level up. In those cases we just put two boards under the low jacks and that usually does the trick.
DonandBonnie is offline   Reply With Quote
Old 12-05-2013, 01:07 AM   #11
jimcol
Montana Master
 
jimcol's Avatar
 
Join Date: Dec 2007
Location: Kansas City, Missouri
Posts: 2,707
M.O.C. #7992
Send a message via AIM to jimcol Send a message via MSN to jimcol
Quote:
quote:Originally posted by Bigsky3625RE

We use 2 x 6 wood blocks under our jacks. If you ever need firewood you have it.

They are cut to about one foot long. Don't use the treated wood.
Bigsky3625RE, Just curious why you suggest not using treated wood? Is it in case you need it for firewood? Jim
__________________
2006 3000RK
2009 Ram 2500
jimcol is offline   Reply With Quote
Old 12-05-2013, 02:10 AM   #12
mach111
Montana Fan
 
Join Date: Jan 2013
Location: Fountain Inn
Posts: 209
M.O.C. #13142
Quote:
quote:Originally posted by DonandBonnie

We bought pressure treated 2x8's and cut them into 2 ft. lengths. When not in use they ride in the bed of the truck. The 2 ft. length helps spread the weight to minimize the settling in softer ground. They serve another purpose beside support. In a couple campgrounds that are not level, we have had the auto level fail due to not enough travel on the jack to level up. In those cases we just put two boards under the low jacks and that usually does the trick.
We use this method also. The extra height helps in some instances. The blocks can also serve as help if you need to put a jack under frame.
mach111 is offline   Reply With Quote
Old 12-05-2013, 02:39 AM   #13
Bigsky3625RE
Montana Fan
 
Join Date: Sep 2012
Location: Redmond
Posts: 274
M.O.C. #12815
Quote:
quote:Originally posted by jimcol

Quote:
quote:Originally posted by Bigsky3625RE

We use 2 x 6 wood blocks under our jacks. If you ever need firewood you have it.

They are cut to about one foot long. Don't use the treated wood.
Bigsky3625RE, Just curious why you suggest not using treated wood? Is it in case you need it for firewood? Jim
Jim, you are correct. A tip we got from a RV tech. During a pdi.

May never need it but it made sense to me.....
Bigsky3625RE is offline   Reply With Quote
Old 12-05-2013, 02:55 AM   #14
jimcol
Montana Master
 
jimcol's Avatar
 
Join Date: Dec 2007
Location: Kansas City, Missouri
Posts: 2,707
M.O.C. #7992
Send a message via AIM to jimcol Send a message via MSN to jimcol
Thanks for your response. That was the only reason I could think of. Jim
__________________
2006 3000RK
2009 Ram 2500
jimcol is offline   Reply With Quote
Old 12-05-2013, 03:28 AM   #15
mhs4771
Montana Master
 
mhs4771's Avatar
 
Join Date: Dec 2009
Location: Sebring
Posts: 3,658
M.O.C. #9969
We're with some of the others, the large (approx 12" x 12" x 1/2") orange pads. Also carry a few 2x10s cut to 10" for those few times we need that little extra lift to get level. Level-Up is great, but we've been in places where some of the jacks would run out of stroke.
__________________
Michelle & Ann
2018 Chevy 3500HD High Country DRW 4X4 Crew Cab w/Duramax/Allison, Formally 2010 Montana 2955RL, Now Loaded 2016 SOB, Mor/ryde IS, Disc Brakes & Pin Box, Comfort Ride Hitch, Sailun 17.5 Tires.
mhs4771 is offline   Reply With Quote
Old 12-05-2013, 10:02 AM   #16
WeBeFulltime
Montana Master
 
WeBeFulltime's Avatar
 
Join Date: May 2011
Location: Hixson
Posts: 3,436
M.O.C. #11397
I use 2x12x12 treated under each pad. I find that the rig usually has less "movement". Chester Frost County Park in Chattanooga requires pads and they must be wood.
__________________
2018.5 Montana 3791RD


Full Timers 9/1/2010 through 1/16/2020.
WeBeFulltime is offline   Reply With Quote
Old 12-05-2013, 12:15 PM   #17
artfuldodger
Montana Fan
 
Join Date: Nov 2010
Location: Chatsworth
Posts: 468
M.O.C. #10933
A friend of mine was advised to use non conductive pads to insulate his motorhome in case of a lightning strike as the leveling pads are metal and would be perfect grounds. Right or wrong?
__________________
Gayle and John Devall
2017 Legacy 3720 IS and Disc brakes
1120 watts solar panels and 300 AH lithium batteries
2011 Ford f350 srw long box Lariat with B&W Patriot hitch. Residential Fridge.
artfuldodger is offline   Reply With Quote
Old 12-05-2013, 12:38 PM   #18
7.3Ford
Montana Master
 
7.3Ford's Avatar
 
Join Date: Oct 2009
Location: Indian Land
Posts: 1,142
M.O.C. #9808
I did a post on the stands I made. Version 2 is lighter and stronger.

http://www.montanaowners.com/forums/...chTerms=stands

I have four of them, since I only have four jacks on BigFoot.
__________________
2015 Montana 3611RL - 2020 RAM 3500 SRW 4X4
John Walker, Indian Land, SC
Blog https://RoVIngWalkers.blogspot.com/
7.3Ford is offline   Reply With Quote
Old 12-05-2013, 01:02 PM   #19
Recumbent
Montana Master
 
Join Date: May 2010
Location: Rock Island
Posts: 1,074
M.O.C. #10457
We use 12"X12"X1.5" (3/4" Marine Plywood double thick). The less the Level Up extends the rams the more stable the coach, so we have all 6 hydraulic cylinders 1.5" less extended. Some places actually have required pads, and one place required that all our jacks be placed on their concrete pad. As mentioned before if a site is very unleveled we can put the pads where needed.
Recumbent is offline   Reply With Quote
Old 12-05-2013, 02:44 PM   #20
rohrmann
Montana Master
 
rohrmann's Avatar
 
Join Date: Oct 2012
Location: Box Elder
Posts: 4,690
M.O.C. #12947
As for lightning protection using plastic pads, it won't make any difference. The energy and voltage in lightning is so great, you would need quite a stack of them and they would have to be perfectly clean, assuming they had dielectric properties sufficient to insulate the trailer from the ground. You would also need to have the tires clear of the earth. Your best bet would be prayer, that you aren't the one who gets hit.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
rohrmann is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Snap Pads for Level-up Fire5er Additions & Improvements 10 01-22-2016 04:07 PM
Stair Pads rames14 General Discussions about our Montanas 4 03-05-2015 04:41 PM
I just noticed one of my foot pads is wet with oil Mark N. General Discussions about our Montanas 4 11-30-2014 01:00 PM
RV Pads for Stabilisers Trailer Trash 2 Trailers, Tow Vehicles & RV related items for Sale 2 10-26-2014 12:06 PM
New Jack Pads Rob Cooley It's a Dirty Job but Someone has to do it! 0 03-14-2003 02:56 PM

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 12:32 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.