In Command main panel red light ?

[hemiallen]

In our 3120rl 2021 Legacy model with In command, on the master panel in the underbelly I just noticed a red light in the image I just added below. Anyone know what the red light indicates? I never noticed it until recently, hoping it's supposed to be red and I just never noticed it.

I did have to replace the GFCI in the bathroom a few weeks ago after the island lost 120v power. I actually replaced it while camping and it worked for the rest of the trip, but during the next trip I found the new gfci test buttons wouldn't work after having the outlets dead again. Another new unit fixed it, so far. I doubt this is the reason for the red LED, but figured I would mention it for diagnosing the current red light.

Thanks
Allen

[scottz]

What is the writing above the light? Can't tell for certain from the photo. Looks like "connected indicator". I'm going out on a limb and say this is normal, but I don't take the cover off my unless I have a problem (never had one).

[M&M]

From troubleshooting manual

A RED LED will indicate that the BCM is receiving 12 VDC.

I think you can find a copy in Files section.

[hemiallen]

Thank you very much. I hadn't noticed it before and assumed it was a fault light.

Sorry, I edited the words above it once I figured out how to post the image. I didn't realize once posted the clarity was less than the picture.

Allen

[Gmlexus]

Just call the help line at In Command. I have called them several times before and they are very helpful.

[Foldbak]

BCM Power Connected Indicator