Mor/ryde X Factor's - Doing it.

[maximo]

Have a 2011 Big Sky 3580RL and installing the Mor/ryde X Factor's next week. Had to call Montana to make sure the RV had the Mor/ryde LRE suspension in it and it would use two X Factor UO 21-003 crossmembers and one X Factor RE 21-004 crossmember. I poured a 24 ft by 60 ft pad next to one of my barns and am having a 50 amp service put on the pad. I have a slightly tight cramp to make putting the RV on the pad and the X Factor crossmembers will help. Also some of the RV Parks have tight turns to make when parking a 37 ft RV.
Plan on building some kind of roof over the pad some time this year.

Frank

[NCFischers]

I built a barn for the Monty and can tell you that keeping the sun, leaves and pine needles off the trailer was well worth it.

[Bucky573]

Maximo - just curious, what are they getting for the X-factor installed???
I just had a trailer frame company build and install a brace in the same manner as the X-factor. They used 2"x3" tube steel fabricated to fit between the Mor/ryde LRE boxes. No slotted holes like the X-factor. It wasn't cheap, but it gives me piece of mind.