I have a small drip of the fresh water drain pipe. I can turn the plastic hose by hand. Hoping there is just a loose camp where the drain pipe connects to the tank. I see no easy way of dropping the bottom cover off there. Is it feasible to cut slits away from the hose and get a wrench to tighten the screw. I am sure others have had this problem. I guess it also could be a cracked wield. The rig is not setting on level, so I think the leak has to be right at the hose. Any help would be appreciated. Here is a picture. As if no body knew what I am talking about. Da
Thanks Lou