Originally Posted by Dpusey
Where is bulkhead connector located
The connector on the back of the trailer where you connect the power cord. Several posts lately about loose wires there and burned connectors. Look for discoloration on that connector.
If nothing obvious, I would start at the park outlet. IF you are comfortable troubleshooting live AC power, use your voltmeter to verify power on both legs at the park outlet. If so, unplug your cord from the trailer, plug your cord into that park outlet, and use your voltmeter to verify power to the trailer end of the cord. If so, turn off power and unplug your cord from the park outlet. Then remove your connector from the back of the trailer and check the wiring on the inside part of that connector.
Here is a link to measuring that power.