Slide Bottom Pan Gasket Replacement
We were camping this past week on the Central California Coast and I noticed I had a piece of rubber flashing hanging down from the underside of our right side slide (oven and fridge, fireplace side) on our rig. We own a 2016 3160 Legacy Montana. This is the bottom pan slide gasket that appears to be attached to the floor of the trailer and the slide sits on top of it. I located the gasket on the Trekwood website and its listed as a bottom pan seal. See picture.
Looking at my rig today, it appears that I would have to have the slide either jacked up or removed to replace this pan gasket. It also appears that Keystone may have glued this gasket to the floor before installing it in the rig. If that is the case, then the slide would have to come out to fix it properly. So my question is, has anyone replaced this pan gasket and what was the process to do so? Thanks for the input.
Don
__________________
Donjamin & Laurie
Fullerton, CA
2016 Montana Legacy, 3160RL
2015 Ford F-250 SD 4X4
|