I mounted side cameras on my Monty. I put them just below the front side marker. Easy access to drilling a hole and wiring, as it goes right into the propane tank
compartment. The wiring was easy to fish over to the front compartment, where all the cables meet up from all the cameras, including the rear camera. From there I drilled a hole just above the compartment door for the cable that goes between the trailer and the truck. You just have to look inside the compartment, above the door, for a spot to drill, as there is frame work there that could get in the way. The bracket for the cameras had a hole in it, so I could fish the wire through it and then in the hole. The hole had to be larger enough to be able to let the cable end get through, as it already had a connector on it. Used a modified groument to fill the hole and some white exterior caulking to water proof.
__________________
2006 Montana 3650RK with Improvements.
2014 Ford 6.7L PSD 4WD CC LB Dually & Hadley's.
|