Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Montana Owners Club - Keystone Montana 5th Wheel Forum > MOC Technical Forums > Montana Problems, Problem Solving & Technical Help
Click Here to Login

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-23-2007, 01:05 PM   #1
pep1977
Seasoned Camper
 
Join Date: Jan 2006
Location: boron
Posts: 82
M.O.C. #5248
UPDATED--HELP....A/C control board wiring

Just received everything to put the comfort control center in the monty. have some questions. when i pulled the old board out i found it to have 4 wires. 2 for the 12 volt and 2 for the furnace. the new one has 6 wires, the 2 new ones say load shed. do i need to worry abnout these at all, as it looks i will wire the same way as it is presently, just the extra wires are throwing a wrench in the gears for me. any help would be greatly appreciated.
 
pep1977 is offline   Reply With Quote
Old 08-23-2007, 01:20 PM   #2
ole dude
Montana Master
 
Join Date: Apr 2007
Location:
Posts: 992
M.O.C. #7128
I might think the other two wires might be for a second A/C or such to keep both units from trying to start at the same time.
ole dude is offline   Reply With Quote
Old 08-23-2007, 03:33 PM   #3
OntMont
Montana Master
 
Join Date: Jan 2003
Location: Haldimand County
Posts: 2,413
M.O.C. #122
Somewhere in the Forum archives, there are detailed instructions for this task. All I can remember now, is that if you have the right parts, it is not a complicated job. Try doing some searches, or wait a bit, and someone with a better memory than mine may come along with answer you seek.
OntMont is offline   Reply With Quote
Old 08-23-2007, 05:32 PM   #4
Ozz
Montana Master
 
Join Date: Jul 2006
Location: K.C.
Posts: 11,731
M.O.C. #5980
Any wiring diagram? Could you post it, if any?
Ozz is offline   Reply With Quote
Old 08-24-2007, 04:04 AM   #5
pep1977
Seasoned Camper
 
Join Date: Jan 2006
Location: boron
Posts: 82
M.O.C. #5248
UPDATE- Got the unit wired, but am now faced with the screen reading EE, i am going to assume it is error, but not sure, Dometics paperwork does not give any explanations on anything other than what the buttons do and how to operate the unit. so i am at a loss right now, just keep trying to plug along and hope it works someday.
pep1977 is offline   Reply With Quote
Old 08-24-2007, 04:17 AM   #6
Ozz
Montana Master
 
Join Date: Jul 2006
Location: K.C.
Posts: 11,731
M.O.C. #5980
Try killing the power to it, and see what it reads then.
Ozz is offline   Reply With Quote
Old 08-24-2007, 04:29 AM   #7
pep1977
Seasoned Camper
 
Join Date: Jan 2006
Location: boron
Posts: 82
M.O.C. #5248
OZZ- will try that this afternoon after i get off work. along with making sure all is wired correct again, a few speed bumps along the way is pretty normal, its all good. thanks for all the help
pep1977 is offline   Reply With Quote
Old 08-24-2007, 06:21 AM   #8
OntMont
Montana Master
 
Join Date: Jan 2003
Location: Haldimand County
Posts: 2,413
M.O.C. #122
There are some dip switches that have to be set to match your units heating/cooling configuration.
OntMont is offline   Reply With Quote
Old 08-24-2007, 07:03 PM   #9
EagleRunner
Montana Fan
 
Join Date: Jan 2006
Location: Spokane Valley
Posts: 222
M.O.C. #5255
pep1977,

Try this link for further information. I hope this helps.

http://bryantrv.com/docs2/docs/ccc5.pdf
EagleRunner is offline   Reply With Quote
Old 08-25-2007, 05:14 AM   #10
OntMont
Montana Master
 
Join Date: Jan 2003
Location: Haldimand County
Posts: 2,413
M.O.C. #122
Here is a link to the instructions posted on this Forum. http://www.montanaowners.com/forums/...=%2Cthermostat
The part you need to look at is towards the bottom of that page, and include photos.
The whole thread is many many pages long, it makes interesting reading if you have a few hours to spare, but I think this page has the information you need.
OntMont is offline   Reply With Quote
Old 08-27-2007, 08:20 AM   #11
pep1977
Seasoned Camper
 
Join Date: Jan 2006
Location: boron
Posts: 82
M.O.C. #5248
Thank you everyone for the help, got everything going friday afternoon, so we werent roasting over the weekend. I had everything wired correctly, just had an error on the unit that needed to be reset, then we were off and running again. the only thing i wish the CCC had that the remote had was the timer. but so far so good. again thanks
pep1977 is offline   Reply With Quote
Old 08-27-2007, 09:35 AM   #12
Ozz
Montana Master
 
Join Date: Jul 2006
Location: K.C.
Posts: 11,731
M.O.C. #5980
Glad it's going, now on to the next crisis.........
(There always seems to be one in Rv'ing.)
Ozz is offline   Reply With Quote
Old 08-27-2007, 10:35 AM   #13
Mudchief
Montana Master
 
Join Date: Nov 2005
Location: Paola
Posts: 5,739
M.O.C. #4961
Ozz you are right. Fix something have a few cool ones and wait for the next.
__________________
Dennis & Linda Ward
Paola, Kansas
Montana 3735MK Legacy Edition
1200 watts of Solar
Mudchief is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Comfort control center wiring msieger Montana Problems, Problem Solving & Technical Help 4 04-26-2014 07:37 AM
Dual landing gear motors and new control board MikeM Additions & Improvements 7 02-26-2014 01:13 PM
Remote Control Board Leaseit Trailers, Tow Vehicles or RV related items Wanted 2 10-17-2012 06:13 AM
Updated Apollo information.....updated Ozz Montana Problems, Problem Solving & Technical Help 4 07-30-2012 03:11 PM
Remote control landing gear control Ozz Additions & Improvements 29 11-15-2006 04:55 AM

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 05:59 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.