Norcold 1210 Refrig Control Module Reset
I have a 2011 Montana 3750 FL. My Norcold 1210 Refrig has just had the high temperature switch recall item added. A couple of days ago, I was running the Refrig on gas, and I screwed up and left the 4 lights on inside the 5th wheel and ran down the battery. When I realized what had happened, I plugged the AC back into the trailer to charge the battery back up again. When I was in the trailer checking everything out, I noticed that the Refrig was beeping and giving me a L1op trouble code, which is indicative of the high temperature switch activating and locking out the Refrig. This lock-out is not the recall switch that was added, but instead the original factor installed high temperature switch. I called my service guy to ask how to reset this lockout and he said to lift the positive battery terminal on the battery, let it sit for 5 minutes, then power it back up again, and it "should" reset the control module. It didn't work. Next step is to use a wire jumper to reset the module, I haven't got there yet. I was just checking to see if anyone else has run down there battery with the Refrig on gas and run into the same Refrig lock-out code, and what you had to do to reset the control module.
|