|
12-11-2021, 07:55 PM
|
#1
|
Established Member
Join Date: Sep 2019
Location: Houma
Posts: 26
M.O.C. #24835
|
Lippert Level Up Jack Bolts RecommendedTorque
I want to raise the jacks on my 3121RL. I looked on Lippert's site but was not able to find information on torque on OME jacks bolts. Has anyone raised their jacks, if so, what torque did you use?
Thanks.
David
|
|
|
12-11-2021, 08:25 PM
|
#2
|
Montana Master
Join Date: Oct 2012
Location: Box Elder
Posts: 4,774
M.O.C. #12947
|
If the 1/2" bolts have three tick marks on the heads, they are Grade 5 bolts, 75 ft lbs, and if there are five tick marks on the heads, they are Grade 8 bolts, 107 ft lbs. These torques are for plain bolts completely dry, no lubricant on the threads. If the nuts are flange style, apply torque to the bolt, not the nut.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
|
|
|
12-11-2021, 10:01 PM
|
#3
|
Site Team
Join Date: Oct 2005
Location: Carmichael - CA
Posts: 7,690
M.O.C. #4831
|
52-64 lbs for the attachment bolts. Read all about the installation of the Level Up system in the Lippert manual Here
__________________
Carl (n Susan)
There is more to life than fuel mileage.
2012 Montana 3700RL Big Sky Package towed by a 2015 Ford F350 6.7L PSD 4WD CC LWB
|
|
|
12-12-2021, 06:59 AM
|
#4
|
Established Member
Join Date: Sep 2019
Location: Houma
Posts: 26
M.O.C. #24835
|
Thanks for all the replies. I will check the bolts today and see what marks they have on the heads. The nuts do have flanges and I have been torqueing the head of the bolt. I also found the manual that Carl n Susan posted but I wasn't sure it applied to OEM jacks since that manual seemed to be for an aftermarket system. However, using that manual I have torqued the bolts to 60 ft.lbs. at present. I think I will give Keystone a call and see if they can help as well. I will post a reply if I find out anything worth reporting.
|
|
|
12-12-2021, 10:09 AM
|
#5
|
Site Team
Join Date: Oct 2005
Location: Carmichael - CA
Posts: 7,690
M.O.C. #4831
|
The aftermarket system is the same as what is installed at the factory. The torque specs are correct for all of them
__________________
Carl (n Susan)
There is more to life than fuel mileage.
2012 Montana 3700RL Big Sky Package towed by a 2015 Ford F350 6.7L PSD 4WD CC LWB
|
|
|
12-13-2021, 11:30 AM
|
#6
|
Established Member
Join Date: Sep 2019
Location: Houma
Posts: 26
M.O.C. #24835
|
A quick follow-up here. I called Lippert Customer Support (574-537-8900) and confirmed that Carl n Susan was right. The suggest torque was 52-64 ft.lbs.
Thanks to everyone who responded.
|
|
|
12-13-2021, 12:37 PM
|
#7
|
Montana Master
Join Date: Oct 2018
Location: Anderson
Posts: 2,787
M.O.C. #22835
|
I moved my rear jacks up about holes. I used a 3 foot breaker bar to break the bolts loose and that was standing on the breaker bar at that. I figure, when I put the bolts back on, no matter how much torque I gave the bolts, It would never be as much torque reapplying the bolts as it took to remove them. I gave the breaker bar all the umph I had and that was that.
I check them occasionally, and I can't budge them any tighter. They've never broken, so I guess they are OK. Sometimes we just over think things. Keep it simple, that's how I did it.
And oh ... that same socket fits my wheel nuts perfect. So, the breaker bar and that socket have become a permanent accessory for my Montana.
__________________
History is not about the past, it's an explanation of the present.
2019 Montana High Country 375FL
2014 Chevy Silverado Duramax, 6.6L Dually
|
|
|
12-19-2021, 01:36 PM
|
#8
|
Seasoned Camper
Join Date: Nov 2019
Location: Estacada
Posts: 77
M.O.C. #25265
|
Quote:
Originally Posted by DutchmenSport
I moved my rear jacks up about holes. I used a 3 foot breaker bar to break the bolts loose and that was standing on the breaker bar at that. I figure, when I put the bolts back on, no matter how much torque I gave the bolts, It would never be as much torque reapplying the bolts as it took to remove them. I gave the breaker bar all the umph I had and that was that.
I check them occasionally, and I can't budge them any tighter. They've never broken, so I guess they are OK. Sometimes we just over think things. Keep it simple, that's how I did it.
And oh ... that same socket fits my wheel nuts perfect. So, the breaker bar and that socket have become a permanent accessory for my Montana.
|
Was there any thread locker on the bolts?
|
|
|
06-08-2022, 01:10 AM
|
#9
|
Gone Traveling
Join Date: Jun 2022
Location: gasdd
Posts: 1
M.O.C. #31141
|
Have you checked the condition of the bolts? If you haven't used the jack for a long time, it could oxidize and rust.
|
|
|
06-08-2022, 10:47 AM
|
#10
|
Site Team
Join Date: Aug 2007
Location: Omaha
Posts: 6,795
M.O.C. #7560
|
Dave while at numerous previous Fall Rallies over the years I have attended quite a few of the Lippert/LCI seminars they have put on at the Rally. One thing they have stressed and that is try not to extend the legs any more than 11 inches from the up position. Many folks will do this because of un-levelness (if there is such a word) of the unit on a site or the site being really unlevel. Extending the legs more than the 11" creates unsteadiness and you will feel that while walking around on the inside of the unit. Placement of blocks under the feet of the leveling legs will help with the length the rams will be extended and the movement of the unit. Just keep that in mind when you move the level-up legs which it sounds like you have done already. Good luck and Happy Camping!
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|