Unfortunately I don't have any picts of the install. The LEDs are the 5 meter led strips from amazon and they have 3M tape on the back side that you use to mount it (
https://www.amazon.com/dp/B01ABTEP82?psc=1). The ones around the island, I stuffed/stuck up under the lip of the countertop. The ones inside the cabinet were just stuck to the back of the cabinet. The switch is an RV style 12V dual switch (
https://www.amazon.com/JR-Products-1...002UC144M?th=1). I mounted the sitch next to the dual outlet on that side above the detector. The toughest part of the install is feeding the wires from the LEDs into the cabinet under the lip without making too big of a hole that is visible.
Linear Mode
