Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Montana Owners Club - Keystone Montana 5th Wheel Forum > GENERAL DISCUSSIONS > General Discussions about our Montanas
Click Here to Login

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 07-06-2020, 05:31 PM   #1
sciortinosr
Established Member
 
Join Date: Sep 2019
Location: BIRMINGHAM
Posts: 11
M.O.C. #25008
Levelers

I have a 2019 381th and can't reset the module. All 6 levels are completely up. Any help out there? If I disconnected the batteries would that reset it? Thanks in advance, Pete
 
sciortinosr is offline   Reply With Quote
Old 07-06-2020, 05:44 PM   #2
DadsHemi
Montana Master
 
DadsHemi's Avatar
 
Join Date: Sep 2017
Location: Florence
Posts: 945
M.O.C. #20472
Are you saying they won’t go down when you push the level button
__________________

2018 Ram 3500 MegaCab 4x4 Aisin, 4:10 Gears
Titan 50 Gal Tank, Air Lift Wireless Bags
2017 3160 RL
DadsHemi is offline   Reply With Quote
Old 07-06-2020, 05:54 PM   #3
sciortinosr
Established Member
 
Join Date: Sep 2019
Location: BIRMINGHAM
Posts: 11
M.O.C. #25008
Sorry, the automatic leveling system won't reset. Manually they work.
sciortinosr is offline   Reply With Quote
Old 07-06-2020, 06:17 PM   #4
jeffba
Montana Master
 
Join Date: Oct 2017
Location: Bastrop
Posts: 2,892
M.O.C. #20753
run them all down at least 6 inches and then retract them. See if the clears the error
__________________
Mocha, one-eyed toothless, hurricane survivor, Pirate dog
2019 20th Anniversary Edition 3701LK
B&W 20K for Ford OEM Puck
2018 Ford F-350 Lariat CCLB PSD DRW KJ5CQH
jeffba is offline   Reply With Quote
Old 07-06-2020, 06:19 PM   #5
Carl n Susan
Site Team
 
Carl n Susan's Avatar
 
Join Date: Oct 2005
Location: Carmichael - CA
Posts: 7,323
M.O.C. #4831
If the jacks work manually, but the Auto Level doesn't, then perhaps the "brain" lost its Auto Level Calibration. You should level the unit manually then follow the procedure for "Zero Point Calibration". The 1st Post in this Thread will give a link to LCI's procedure.

https://www.montanaowners.com/forums...ad.php?t=71009


Basically, turn the system OFF;
Press "Front" 10 times quickly;
Press "Rear" 10 times quickly;
and follow the reset instructions.


Note: it has to be exactly 10 times on each button or the process won't work.
__________________
Carl (n Susan)
There is more to life than fuel mileage.
2012 Montana 3700RL Big Sky Package towed by a 2015 Ford F350 6.7L PSD 4WD CC LWB

Carl n Susan is offline   Reply With Quote
Old 07-06-2020, 06:20 PM   #6
DutchmenSport
Montana Master
 
DutchmenSport's Avatar
 
Join Date: Oct 2018
Location: Anderson
Posts: 2,543
M.O.C. #22835
If yours is the LCI 6 point or 4 point leveling system, it sounds like you just need to reset the system. It's fairly easy to do. Lower each jack half way down (at least extend them 6 inches. Then retract all at the same time. System reset.

If that doesn't work, then your system may have lost it's "level" position, in which case you need to follow the manual to reset "level". There are a few steps that need to be followed in a specific order. It's not hard, it's just intimidating if you've never done it before.

Here's a link to the LCI Level Up manual that covers all the systems. Find yours and follow the directions for "Zero Point Calibration".

Click here for PDF manual
__________________
Who you are right now is a sum total off all you use to be.
2019 Montana High Country 375FL
2014 Chevy Silverado Duramax, 6.6L Dually
DutchmenSport is offline   Reply With Quote
Old 07-06-2020, 06:20 PM   #7
sciortinosr
Established Member
 
Join Date: Sep 2019
Location: BIRMINGHAM
Posts: 11
M.O.C. #25008
Will try, thanks
sciortinosr is offline   Reply With Quote
Old 07-07-2020, 04:19 PM   #8
sciortinosr
Established Member
 
Join Date: Sep 2019
Location: BIRMINGHAM
Posts: 11
M.O.C. #25008
Quote:
Originally Posted by DutchmenSport View Post
If yours is the LCI 6 point or 4 point leveling system, it sounds like you just need to reset the system. It's fairly easy to do. Lower each jack half way down (at least extend them 6 inches. Then retract all at the same time. System reset.

If that doesn't work, then your system may have lost it's "level" position, in which case you need to follow the manual to reset "level". There are a few steps that need to be followed in a specific order. It's not hard, it's just intimidating if you've never done it before.

Here's a link to the LCI Level Up manual that covers all the systems. Find yours and follow the directions for "Zero Point Calibration".

Click here for PDF manual
That worked perfectly! Thanks alot.
sciortinosr is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 04:41 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.