Adding W/D

[Charleskorte]

Any advice on how the dryer is vented?
Mine is a 07 model 3R75RLS with w/d prep (closet by the door)

[CaptnJohn]

Originally Posted by Charleskorte

Any advice on how the dryer is vented?
Mine is a 07 model 3R75RLS with w/d prep (closet by the door)

The only part about the install that is a concern is cutting the hole through the side of your coach. Being a coward I have always had a dealer install the dryer.

[DQDick]

When it was new there was probably a sticker where you cut the hole.

[Eagleback]

i just did mine, you have to get a stud finder to find not only the vertical studs but also the cross frame pieces that are up towards the front of the unit where the front cap mounts to the side wall and cut a hole in the middle of it all. sometime the morning dew on the camper will help in this situation. be careful not to cut to far forward on the inside wall or you will cut in to the front cap. you can also use a tiny drill bit and make little holes inside the closet to try to find the frame.

[snowbirds R us]

I have a 3400rl and if your closet is where mine is, I can send you measurements where to cut the hole. I'm not familiar with your model number

[CaptnJohn]

Originally Posted by DQDick

When it was new there was probably a sticker where you cut the hole.

The way they put these together I don't trust the sticker any more than the guy that slapped it there thinking about milking...