Trust you are asking about the switch due to your landing gear not functioning in some manner. Hopefully someone that has a rig with electric motor driven legs will be able to help you. I can tell you that the basic operation for the switch is to allow the motor to run in either direction by switching the polarity of +12vdc and ground between the two motor leads, so the switch is doing nothing more than this...same as if you had the two motor wires in your hand and hooked them up to a battery each way. John
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|