 |
09-03-2020, 12:04 PM
|
#1
|
|
New Member
Join Date: Sep 2020
Location: Union Grove
Posts: 5
M.O.C. #27022
|
Gas Oven Going Out After Lighting
Have a 2019 Montana 3121RL -
After lighting the oven it keeps cutting off. Then I have to re-light it again. Any ideas why?
|
|
|
|
09-03-2020, 12:43 PM
|
#2
|
|
Montana Master
Join Date: Jun 2018
Location: Carson City
Posts: 2,017
M.O.C. #21963
|
Hold the knob in longer before moving it to on position.
__________________
2016 3160, Legacy, Sailuns, Splendide 2100 xc vented, 1 1/2" axle lift blocks, disk brakes. 2014 Ram 3500 SRW SWB 4X4 6.7 Aisin Mega Cab, EBC slotted disks and brakes, Titan fuel tank.
|
|
|
|
|
09-03-2020, 05:33 PM
|
#3
|
|
Site Team
Join Date: Sep 2017
Location: Oro Valley
Posts: 3,924
M.O.C. #20477
|
Also run the stovetop burners to ensure all of the air is out of the line.
__________________
Zack and Donna plus Millie and Ranger
2018 3160RL
"Life is too short to stay indoors, enjoy the ride!"
|
|
|
|
|
09-04-2020, 02:37 PM
|
#4
|
|
Montana Master
Join Date: Feb 2020
Location: Bencia
Posts: 538
M.O.C. #25828
|
Ditto Montana Man and AZ Traveler.
|
|
|
|
|
09-04-2020, 08:17 PM
|
#5
|
|
Montana Master
Join Date: Apr 2017
Location: 1000 oaks
Posts: 950
M.O.C. #19630
|
Do not turn the oven to the off position. Leave the oven in the pilot position and the pilot will stay on.
__________________
2011 2955RL Gen-Y Executive Kingpin
2022 GMC 2500HD Duramax/Alison
4X4 Crew Cab/Standard bed.
|
|
|
|
|
09-04-2020, 08:40 PM
|
#6
|
|
Site Team
Join Date: Sep 2017
Location: Oro Valley
Posts: 3,924
M.O.C. #20477
|
Quote:
Originally Posted by prndl
Do not turn the oven to the off position. Leave the oven in the pilot position and the pilot will stay on.
|
The late model ovens use electronic ignition - there is not a pilot position.
__________________
Zack and Donna plus Millie and Ranger
2018 3160RL
"Life is too short to stay indoors, enjoy the ride!"
|
|
|
|
|
09-07-2020, 12:59 PM
|
#7
|
|
Montana Master
Join Date: Jun 2017
Location: Northern Illinois
Posts: 525
M.O.C. #19994
|
Quote:
Originally Posted by Camp CA
Ditto Montana Man and AZ Traveler.
|
Ditto on air in the line, we always purge it with the stove top.
__________________
The "Black Pearl"-2017 3731FL Legacy Package
2017 F-450 Platinum, 6.7 PSD
|
|
|
|
|
09-07-2020, 01:04 PM
|
#8
|
|
Established Member
Join Date: May 2020
Location: Rapid City
Posts: 46
M.O.C. #26357
|
We had the same issue. What has been working for us, we leave the oven door open for the first 30 seconds to a minute.
__________________
2020 3813MS
2019 Chevy 3500 CC DRW, Duramax
|
|
|
|
|
09-07-2020, 01:08 PM
|
#9
|
|
Established Member
Join Date: May 2020
Location: Rapid City
Posts: 46
M.O.C. #26357
|
We have the same issue what has worked for us, we keep he oven door open for the first 30 to 60 seconds.
__________________
2020 3813MS
2019 Chevy 3500 CC DRW, Duramax
|
|
|
|
|
09-07-2020, 04:22 PM
|
#10
|
|
Montana Master
Join Date: Jun 2018
Location: Carson City
Posts: 2,017
M.O.C. #21963
|
Hey OP, did you figure it out? Folks are trying to help you.
__________________
2016 3160, Legacy, Sailuns, Splendide 2100 xc vented, 1 1/2" axle lift blocks, disk brakes. 2014 Ram 3500 SRW SWB 4X4 6.7 Aisin Mega Cab, EBC slotted disks and brakes, Titan fuel tank.
|
|
|
|
|
09-07-2020, 08:50 PM
|
#11
|
|
Site Team
Join Date: Oct 2005
Location: Carmichael - CA
Posts: 7,359
M.O.C. #4831
|
It appears the OP posted this at 11:04 on 9/3/2020 and hasn't returned since.
__________________
Carl (n Susan)
There is more to life than fuel mileage.
2012 Montana 3700RL Big Sky Package towed by a 2015 Ford F350 6.7L PSD 4WD CC LWB
|
|
|
|
09-13-2020, 01:37 PM
|
#12
|
|
Established Member
Join Date: Jul 2020
Location: Des Arc
Posts: 18
M.O.C. #26605
|
I have the same issue with my 2020 3121rl with furrion oven. The pilot will light and stay on but if the burner is turned on it runs for 3-4 min then goes out. I just got it back from getting a valve replaced because it took 2 1/2 hrs to reach 300 degrees. It’s almost like the fan is blowing the flame out.
|
|
|
|
|
09-13-2020, 02:28 PM
|
#13
|
|
Established Member
Join Date: Oct 2019
Location: Vermillion
Posts: 11
M.O.C. #25073
|
Our 2020 3121rl furion did the same thing
The dealer replaced the whole oven under warranty . The new one is different but works fine. It is the fan on the original that is the problem.
|
|
|
|
|
09-13-2020, 02:59 PM
|
#14
|
|
New Member
Join Date: Jun 2018
Location: Clovis
Posts: 3
M.O.C. #21925
|
We have had the same problem. Only used it once. We have it at RV shop now. Bought a new ignitor, but not sure if that is the problem. Have tried purging line, keeping door open, and other suggestions. Be interested in hearing if anyone gets it fixed and what it was - besides having to replace whole oven.
|
|
|
|
|
09-13-2020, 03:42 PM
|
#15
|
|
Seasoned Camper
Join Date: Jun 2019
Location: Port Clinton
Posts: 64
M.O.C. #24167
|
Same Problem
Quote:
Originally Posted by williams.psw
Have a 2019 Montana 3121RL -
After lighting the oven it keeps cutting off. Then I have to re-light it again. Any ideas why?
|
We have a 2019 Montana 3121RL with the exact identical problem. We’ve tried all of the suggestions in your previous responses above but haven’t changed the oven as one suggested or had too. In that we use the convection microwave normally as our oven we’ve learned that when we do use the oven we just relight It least once, or twice as required as our normal procedure. The only good thing is that at least it has an igniter and I don’t have to lay on the floor with a lighter to light or relight it. Please advise if you ever find a solution beside changing the oven because we’re obviously out of warranty.
|
|
|
|
|
09-13-2020, 03:59 PM
|
#16
|
|
Seasoned Camper
Join Date: Jul 2019
Location: Burnet
Posts: 85
M.O.C. #24564
|
Sometimes the heat sensor for the pilot light is a little too far away from the flame. I have done minor adjustments successfully before. May have to bend things a little.
|
|
|
|
|
09-13-2020, 04:31 PM
|
#17
|
|
Established Member
Join Date: Oct 2019
Location: Vermillion
Posts: 11
M.O.C. #25073
|
One of the techs said they have replaced several of the ovens because of the same problem. He said the only thing the fan in the oven was good for was to blow the flame out
|
|
|
|
|
09-13-2020, 04:41 PM
|
#18
|
|
New Member
Join Date: Sep 2020
Location: Omaha
Posts: 5
M.O.C. #27089
|
Oven
[QUOTE=williams.psw;1196907]Have a 2019 Montana 3121RL -
After lighting the oven it keeps cutting off. Then I have to re-light it again. Any ideas why?
There is a thermo coupler that looks like a thermometer In the oven. It has to warm up before the gas valve will stay on. Keep holding in the pilot lighting button longer. If that doesn’t work your thermocoupler could be bad.
Its like lighting a gas water heater in a house
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
