Reattached fron cap accent lights

[Busted2341]

I have about 8" of accent light that has begun to come off. What is the easiest way to reattach these? Glue? Or caulking?

[DutchmenSport]

Liquid Nails (the original, not the stuff for "Projects" or Styrofoam). It will never come off. However, that will be a challenge if they quit working and you want to replace the lights.

[Jamesb]

Clear caulk is the best. Because, they will probably quit working again.

[Creeker]

3M Auto Double Sided Tape.

Held ours on for nearly two years and many miles until I replaced them this winter.

[Montana Man]

Push it into a small bead of clear silicone caulk.

[dieselguy]

What Montana Man said ... clean everything good with alcohol or similar before you apply the silicone bead. A little tape to hold it in place helps while the silicone sets.

[WeBeFulltime]

I also used clear silicone caulk and it worked fine. The 2 sided 3M automotive tape works good too.

[Donjamin]

I used clear GE silicone to re-attach my accent lights that I replaced this past November.

Don

[jjwhite368]

I cleaned the track with de-natured alocohol. Then a small beed of clear RTV and an extra dollup on the end to keep air from getting under the tip.