Lippert LCI Level Up Touch Pad
A couple weeks ago I was leaving one camp ground for another. When I tried getting my leveling legs up, they would not work. The touch pad continued to cut off. I would disconnect the power supply line from the touch pad and it would work for a few seconds. I had already put a new battery in the unit a few weeks prior. Every time I touched the control buttons, the pad would cut off. I was able to check the voltage (12.6 to 13 volts). After two hours we were finally able to hook up. We arrived at the next site, unhooked and all was good. I checked the pad out about mid-week and it would not work. Bought a battery charger and charged the battery for about two minutes, fully charged. Just in case I bought a socket, new drill, for a manual operation if need be. Went to hook up, little problem. I ordered a new touch pad thinking it's bad. Arrived broke. New one backed order because it's out of stock from Lippert. I'm keeping the new one after super gluing it back together. hope this solves my issue. Any thoughts? Montana 2016 - 3721 RL
|