Hi I'm not familiar with your particular model.
If you get desparate you can always search for a piano hinge.
They are bascially a long continous hinge that you can either attach with pop rivits or flat head screws. They are manufactured in many types of materials with steel being the cheapest and will rust / corrode the fastest. Brass or stainless would work best.
Just be sure you have clearance depth in the trim if you decide to drill and attach using holes other than the original mounts.
If you do have to drill make a spacer for the drill bit so you will not go too far into the trim. For instance say your drill bit is 2.5inches sticking out of the chuck. If it is a 1/8in Dia bit then use a 2.25 piece of soft drawn copper pipe to slide over the drill bit. This will act as a stop so you won't drill too deep possibly into the glass.
__________________
Chris Donna and Oliver the rescue Dog.
Old 3255RL It is a weekend warrior and less than 15K miles. Mostly sits at the house. Home is where the heart is.
|