|
12-16-2010, 09:57 AM
|
#1
|
Montana Fan
Join Date: Nov 2010
Location: Chatsworth
Posts: 468
M.O.C. #10933
|
JT STRONGARM JACK STABILIZERS
I had a set of these JT'S on my last trailer and they really took the bounce out of the trailer when set up. I removed them and plan to put them on our 2008 Montana 3650 but due to the electric rear jacks they won't work there but I'm wondering if putting them just on the front will be okay for reducing or eliminating the bounce.
__________________
Gayle and John Devall
2017 Legacy 3720 IS and Disc brakes
1120 watts solar panels and 300 AH lithium batteries
2011 Ford f350 srw long box Lariat with B&W Patriot hitch. Residential Fridge.
|
|
|
12-16-2010, 10:14 AM
|
#2
|
Montana Fan
Join Date: Aug 2010
Location: Zanesville
Posts: 117
M.O.C. #10624
|
I used all 6 on my unit, on the electric rear stab jacks I put them from the frame to the rear pads on the stab stabilizer and just added more stability on front to back motion.
|
|
|
12-16-2010, 10:23 AM
|
#3
|
Montana Master
Join Date: Apr 2009
Location: Murrieta
Posts: 5,816
M.O.C. #9257
|
Putting them anywhere that you can, has got to help. If you are referring to the rear jacks do you mean rear stabilizers? Jacks are usually much stronger and capable of lifting and holding much more weight and probably wouldn't need JTs. I have a feeling you mean stabilizers which only help keep things still.
If this is the case I've got to think there is some place you can get the rear JTs installed, too. It might require adding some extra brackets or something to create attach points but maybe someone with the same model and the electric motors at these stabilizers can help provide an idea. If you've had them I have a feeling you'll miss not having them.
I only use a battery powered drill for my stabilizers (unlike the convenience of your powered stabilizers), but would certainly prefer JTs or something to really help provide more stability.
Best of luck solving this one. I look forward to hearing you've got them on!!! I'll be envious until I get something.
|
|
|
12-16-2010, 10:37 AM
|
#4
|
Montana Master
Join Date: May 2003
Location: New Bern
Posts: 4,294
M.O.C. #311
|
Quote:
quote:Originally posted by artfuldodger
I had a set of these JT'S on my last trailer and they really took the bounce out of the trailer when set up. I removed them and plan to put them on our 2008 Montana 3650 but due to the electric rear jacks they won't work there but I'm wondering if putting them just on the front will be okay for reducing or eliminating the bounce.
|
To answer your question the front will eliminate about 80% to 90% of the bounce the back gets about 5% to 10% more. I would definitely put them on the front. As stated there should be someway to mount them on the rear too.
Good luck, let us know what works.
Merry Christmas
|
|
|
12-16-2010, 11:03 AM
|
#5
|
Montana Master
Join Date: Feb 2003
Location: Belvidere
Posts: 1,834
M.O.C. #185
|
Mount the rear JT's to your hitch frame.
|
|
|
12-16-2010, 11:24 AM
|
#6
|
Montana Master
Join Date: Apr 2009
Location: Murrieta
Posts: 5,816
M.O.C. #9257
|
steves, what about the other side of the JT?. Doesn't that mount to the bottom part of the stabilizer? Then when retracting won't his motor be in the way? I think what your suggesting is to offset the JT somehow to not be blocked by the motor.
I think jliveit installed one set to the frontward part of the frame and didn't install the sidewards JT if the motor sits side to side and would block the travel. Or maybe it's in the other direction.
I'm just trying to picture the possibilities.
|
|
|
12-16-2010, 11:38 AM
|
#7
|
Montana Fan
Join Date: Oct 2009
Location: Wilsons
Posts: 404
M.O.C. #9833
|
Mounted mine to the hitch box tubing - drilled and tapped the hitch brace. You are correct it will hit the support arm on the stabilizer as it comes in the kit. However, JT sells an adapter for the foot that provides enough off-set to avoid the stabilizer brace. I purchased this little bracket from them for less than $10.00. According to the JT rep the stabilizers MUST be mounted from side to side on the rear - they do little good when mounted from the stabilizer foot towards the front of the coach.
Jerry
On edit - just FYI I have a 2010 3400RL Montana
|
|
|
12-16-2010, 12:51 PM
|
#8
|
Montana Master
Join Date: May 2006
Location: Oakland
Posts: 887
M.O.C. #5811
|
I had a metal plate welded to cross member on the hitch and attached the JT's to it. I don't have the factory hitch, but when I installing the hitch, I had to move the rear stabilizers forward a little. You can do as Jdrobone did or like I did with a metal plate, either way the rear JT's will help. Probably one of the best improvements I have to the Montana.
|
|
|
12-16-2010, 02:08 PM
|
#9
|
Montana Master
Join Date: Feb 2003
Location: Belvidere
Posts: 1,834
M.O.C. #185
|
Art-n-Marge - Jdrobone eplained it very good!
|
|
|
12-16-2010, 03:55 PM
|
#10
|
Montana Master
Join Date: Jan 2005
Location: North Ridgeville
Posts: 20,229
M.O.C. #2839
|
The front ones do all the work.. If I had it to do over again I would not even buy the rear ones. we use a couple of pyramid jacks to stabilize the rear.
|
|
|
12-16-2010, 05:13 PM
|
#11
|
Montana Master
Join Date: Mar 2010
Location: bloomington
Posts: 540
M.O.C. #10234
|
I put the front ones on first and really didnt notice a lot of difference when I put the rear ones on.But I really am glad I did put them on.
Steve
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|