Sears Kenmore Oasis Elite washer?

[Ozz]

If you have one, there was a recall on them, you should have got a new circuit board already (free)
But you probably have to reset it often, you will get the F01 error code. Sue constantly had to reset it to get a load done.
You can enter the diagnostic mode to check past fault codes, and history of errors by having the machine off, empty.
Press any key except OFF, and hold for 4 seconds, release for 4 seconds, press and hold for 4 seconds, release 4 seconds, hold 4 seconds. All led lights will come on for 5 seconds, then the error codes will flash, if more than one fault, they will show.
The door switch will probably be the culprit, that will be a code F-82 or F-83.
To fix it, spray contact cleaner, silicone, or WD-40 in the area of the rectangular Black button on the door switch. Then push it in 10 times or so, it has very little movement.
Worked for me, might save you $300-$400.
Good luck...