Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Montana Owners Club - Keystone Montana 5th Wheel Forum > GENERAL DISCUSSIONS > General Discussions about our Montanas
Click Here to Login

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 01-15-2010, 08:48 AM   #1
bear
Montana Fan
 
Join Date: Oct 2009
Location: Coeur D Alene
Posts: 159
M.O.C. #9827
Power pack add-on push button for scissors jacks

Has anyone out there used this product,push button stabilization power pack add-on 12volt motor unit.It reads lightweight,high rpm motor kit bolts onto your trailer's existing jacks-no drill or welding.Just add the motors and run the wire to the included switches with 12=volt breakers.This is from JC Whitney.com Would like any feed back.

Thanks
David Swarat (bear)
 
bear is offline   Reply With Quote
Old 01-15-2010, 09:39 AM   #2
gitrdun
Montana Fan
 
Join Date: Jun 2005
Location: Vista
Posts: 343
M.O.C. #4075
I bought the ones from camping world. Mounted my switches next to my rear jacks to keep from using so much wire. Mine work great, won't lift the Monty but they do just what I need. To me, worth the money and time.
gitrdun is offline   Reply With Quote
Old 01-15-2010, 10:28 AM   #3
bear
Montana Fan
 
Join Date: Oct 2009
Location: Coeur D Alene
Posts: 159
M.O.C. #9827
Ray
Thanks for the input,You saved me $125 BUCKS !!!!!!!!!!!!!!I went to camping world .Jc wanted $386 plus shipping.CW $269. It is on its way.
Pays to talk to the group.

A BIG THANKS AGAIN..............
David
bear is offline   Reply With Quote
Old 01-16-2010, 06:21 AM   #4
deadeye
Montana Fan
 
Join Date: Jan 2007
Location: Cresco
Posts: 447
M.O.C. #6693
Bear:

I might mention that you might have to do a little re-enforcement to the jack stands. I have a 2955 and I kept bending mine all the time. I welded a 1 inch angle iron on the sides of the flat irons on the jacks. Solved the problem. I don't have the electric jacks on mine, but I have been thinking about them.. Let us know how yours work...JB
deadeye is offline   Reply With Quote
Old 01-16-2010, 08:02 AM   #5
bear
Montana Fan
 
Join Date: Oct 2009
Location: Coeur D Alene
Posts: 159
M.O.C. #9827
Deadeye

Jack,should have them by wen. will be on by Friday.
Winter time in Coeur d Alene,Idaho,so spend time in my shop when not bossing employees or five grandkids all over grandpa (love it all).
Do you have pictures of what you did to your jacks? Nice if you could post.

Thanks,David
bear is offline   Reply With Quote
Old 01-16-2010, 08:39 AM   #6
deadeye
Montana Fan
 
Join Date: Jan 2007
Location: Cresco
Posts: 447
M.O.C. #6693
I haven't taken any picture of them yet. I am in N.E. Iowa and there is about 18 inches of snow on the ground. I would have to use the skidloader to get to it, as it is parked outside.....Sorry. Maybe I can explain it a little better... On each jack there are two flat support braces. One brace on the front side and one on the back side. They have a bend or brake on the ends of them that has the bolt hole in them. Take a one inch wide angle that is about 1/4 inch thick and weld it on those flats, the length of them from the bend on one end to the bend on the other end. I think those flats are about 18 inches long. Can't remember..... You will notice that you have to weld it on the right side (outword side) so that the braces have clearence to operate properly. I'll see if I can go out and take some pictures ....JB
deadeye is offline   Reply With Quote
Old 01-16-2010, 11:39 AM   #7
Art-n-Marge
Montana Master
 
Join Date: Apr 2009
Location: Murrieta
Posts: 5,816
M.O.C. #9257
Send a message via MSN to Art-n-Marge Send a message via Yahoo to Art-n-Marge
Clever idea. I like the video on the camping world site on how to install then and how they work. I currently use my rechargeable drill with a 3/4 socket to lower and raise the jacks and I must also use the jack wrench to snug them up a little bit to prevent movement. I also need the wrench to get the them started, but I can use the drill to quickly complete the retraction. These motors would provide convenience.

Does anyone know how much torque these motors provide in snugging things up or should the jack wrench be used to tighten things up? The convenience of the motors is a definite plus, but I'd have to think about it being worth $270. I have a feeling that a good turn on the wrench will still provide a more stable situation.
Art-n-Marge is offline   Reply With Quote
Old 01-16-2010, 12:11 PM   #8
deadeye
Montana Fan
 
Join Date: Jan 2007
Location: Cresco
Posts: 447
M.O.C. #6693
Bear:
I lied to you. I welded 1 in flat steel on instead of 1 inch angle. I'll send you a PM....JB..
deadeye is offline   Reply With Quote
Old 05-04-2010, 01:50 PM   #9
BearMacDaddy
New Member
 
Join Date: Mar 2008
Location: Evans
Posts: 8
M.O.C. #8248
I used an 18 volt impact driver to raise and lower mine. Does great plus once I break the lugs on a tire I use it to spin the lug nuts off. I also use it to attach my screw typr chocks
BearMacDaddy is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
installing push button electric dump buckeye Additions & Improvements 11 09-30-2016 02:34 AM
Bedroom Push Button Light Switches failing Desert RVer Montana Problems, Problem Solving & Technical Help 13 11-18-2013 02:23 PM
Awnings-push button retractable deerrahn General Discussions about our Montanas 5 02-27-2013 12:30 AM
Awning - Internal Push Button Retraction rexbouwense General Discussions about our Montanas 4 09-20-2010 03:59 AM
Is a Banks Power pack necessary? jsporter008 Tow Vehicles & Towing 18 05-20-2007 02:01 PM

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 08:24 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.