|
06-06-2015, 07:55 AM
|
#1
|
Montana Master
Join Date: Aug 2010
Location: Washington Coast
Posts: 2,688
M.O.C. #10696
|
First mishap on my 2015
Dang, my first breakage as we went over some Nasty Construction roads on the Oregon Coast got to my Resort and opened up the back door and my wife could see food spilled on the floor out of the Pantry OH OH...the shelves and front fascia(lips) collapsed and dumped everything they were only secured with Staples (LAME) ) so we took everything out and I installed L Brackets under the Fascia where it connects to the side supports as there is a lot of weight with can foods etc.. on those shelves and put more screws in and Now better than new...SOOOO anybody with a 3735MK with the huge pantry in back fair warning put some L brackets under the side supports and front fascia for more support
__________________
[
|
|
|
06-06-2015, 10:04 AM
|
#2
|
Montana Master
Join Date: Feb 2004
Location: Brandon
Posts: 3,944
M.O.C. #1034
|
Jimmy: I am thinking this situation will not be limited to the 3735 but am not really sure. Did the shelves themselves actually break in two or just come off their mounts against the wall?
Our early 3610 has the large wide pantry and we have always wondered how those particle board shelves might hold up with all the weight of our canned goods etc. We have maybe 1/2 inch b 1/2 inch pieces of wood(rails) fastened to the walls on the two sides and back that tells shelves rest on.
__________________
Darwin & Maureen DeBackere
Minnedosa, Manitoba, Canada
2011/3500/Silverado/4x4/DRW/Duramax
2017/3721RL/Legacy Pkg./Pressure-Pro
|
|
|
06-06-2015, 10:19 AM
|
#3
|
Montana Master
Join Date: Aug 2010
Location: Washington Coast
Posts: 2,688
M.O.C. #10696
|
The shelf itself did not break in two it was the front lip (fascia) that holds the shelf up(along with the side supports) and stops things from falling forward that pulled out and that in turn left the thin plywood shelf(it's not even particle board) to sag and everything fell down and you are right DarMar it could apply to all that have a Pantry,and those support wood strips underneath on ea side came loose as well and I put more screws in them too and now it is rock solid
Quote:
quote:Originally posted by DarMar
Jimmy: I am thinking this situation will not be limited to the 3735 but am not really sure. Did the shelves themselves actually break in two or just come off their mounts against the wall?
Our early 3610 has the large wide pantry and we have always wondered how those particle board shelves might hold up with all the weight of our canned goods etc. We have maybe 1/2 inch b 1/2 inch pieces of wood(rails) fastened to the walls on the two sides and back that tells shelves rest on.
|
__________________
[
|
|
|
06-06-2015, 10:22 AM
|
#4
|
Montana Master
Join Date: Feb 2012
Location: Lake Gaston
Posts: 8,773
M.O.C. #12156
|
We have a large pantry in our 2015, but keystone put no edges on the shelves, so when the door is oped, everything falls out. I added edges and works good now. Shelves themselves seem pretty sturdy. Again, ours was an early 2015 before they made what we consider negative changes.
__________________
Mike and Lorraine
2002 3655 FL, 2005 3650RK
2010 3665RE, 2015 3910FB
F350 crew cab dually 6.7
|
|
|
06-06-2015, 02:02 PM
|
#5
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
Keystone does seem to have a love affair with staples.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
06-06-2015, 04:44 PM
|
#6
|
Montana Master
Join Date: Mar 2015
Location: West Richland
Posts: 1,253
M.O.C. #17164
|
We have a nice pantry on our new 3160 RL LE. Door can't open (not very much) with the slide in the travel position. One of the first things I do is to make sure the pantry door did not accidentally open during travel. Don't want to damage it when the slide goes out. As for a mess the worst thing I had was a couple of cans of Pringles roll out when I opened the door. We did put the RV shelf liner on all the shelves which I think helps some. Maybe I will look into installing edges like Mike did. Maybe some pictures would help if you could share your projects end results.
Tom Marty
__________________
|
|
|
06-06-2015, 04:48 PM
|
#7
|
Montana Master
Join Date: Dec 2005
Location: Eugene
Posts: 1,054
M.O.C. #5091
|
As usual, too much cheap material and shoddy construction. Good thing so many of us are handy in repairing all the problems we encounter.
|
|
|
06-06-2015, 07:44 PM
|
#8
|
Montana Master
Join Date: Aug 2010
Location: Washington Coast
Posts: 2,688
M.O.C. #10696
|
You got that right,it only took me about 1hr and a few screws and L brackets to fix ,so you are right it helps being handy beats taking it to the dealer,I will try to take pics and show what I did
Quote:
quote:Originally posted by bigred715
As usual, too much cheap material and shoddy construction. Good thing so many of us are handy in repairing all the problems we encounter.
|
__________________
[
|
|
|
06-06-2015, 08:46 PM
|
#9
|
Montana Master
Join Date: Aug 2010
Location: Washington Coast
Posts: 2,688
M.O.C. #10696
|
__________________
[
|
|
|
06-07-2015, 04:17 AM
|
#10
|
Montana Master
Join Date: Mar 2015
Location: West Richland
Posts: 1,253
M.O.C. #17164
|
Jimmy thanks for posting the pictures. I might have to do something similar. I think my door has a glass insert and the shelf edges could help protect it along with having less mess or a hole in the linoleum cause from the edge of a can.
Tom Marty
__________________
|
|
|
06-07-2015, 05:06 AM
|
#11
|
Montana Master
Join Date: Feb 2004
Location: Brandon
Posts: 3,944
M.O.C. #1034
|
Jimmy: That looks like the identical shelf/support system in our 3610 pantry. Off to the hardware store we go for reenforcements.
__________________
Darwin & Maureen DeBackere
Minnedosa, Manitoba, Canada
2011/3500/Silverado/4x4/DRW/Duramax
2017/3721RL/Legacy Pkg./Pressure-Pro
|
|
|
06-07-2015, 07:16 AM
|
#12
|
Montana Master
Join Date: Aug 2010
Location: Washington Coast
Posts: 2,688
M.O.C. #10696
|
Your welcome Gang ,just a little improvement to save off a messy situation,too bad Keystone will not see this and do it themselves
__________________
[
|
|
|
06-07-2015, 07:24 AM
|
#13
|
Montana Master
Join Date: Jan 2005
Location: North Ridgeville
Posts: 20,229
M.O.C. #2839
|
The staples they use are pitiful. All the shelves in our Ardmore on our 13 402 collapsed when the staples pulled out of the wall panel. A few screws and fixed. Same on the shelving on the end of the counter. Staples pulled out of the wall panel and shelves collapsed. Screws to the rescue.
This just in yesterday. The latch that holds up the front compartment door in the overhang fell down and just missed my head. The latch is just screwed into the overhang plastic with nothing behind it. Super glue and fatter screws to the rescue.
|
|
|
06-07-2015, 01:30 PM
|
#14
|
Montana Master
Join Date: Oct 2012
Location: Box Elder
Posts: 4,702
M.O.C. #12947
|
I had some people laugh about me carrying power tools, compressor and air nailer/staple gun. I've used all the tools putting our rig back together several times. I can't even guess what it would have cost, both time and money, to have someone else do the repairs. Besides doing repairs, I can also do mods when there is a need. Between getting ideas and advise on this forum, for both repairs and mods, makes this site one of the most important tools in the box.
As things break, and when you make the repairs, the entire rig gets stronger. Hopefully, as the roads continue to deteriorate, we can make these rigs hold together better as we make repairs.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
|
|
|
06-07-2015, 01:36 PM
|
#15
|
Montana Master
Join Date: Aug 2010
Location: Washington Coast
Posts: 2,688
M.O.C. #10696
|
yep gang sometimes you have to just roll with the punches and take matters into your own hands,I carry a lot of tools,nuts bolts screws Glue etc.. being a fulltimer it is mandatory and for my truck as well,....Now back to my glass of Vino and relax
__________________
[
|
|
|
06-07-2015, 01:56 PM
|
#16
|
Montana Master
Join Date: Jan 2005
Location: North Ridgeville
Posts: 20,229
M.O.C. #2839
|
It is a shame that we have to do that and many like my self are not as handy as others and some are physically unable to do that. We are a little of both. We do carry a wide array of spare parts, screws, Gorilla tape, super glue, etc.
On a good note. We had our dealer address a list of other issues while the Montana was in for tank replacement among them were the slides. We did not like the way the main slide came in and the noises from the some of the others .We asked them to check out the slide operation and repair as necessary.
My slides are whisper quiet. The sound of the motor is the only sound we can hear. The slides just glide in and out. Notation on the repair order just says checked, adjusted and lubricated slides per customer request. Slide operation normal. The service center did the same on our 06 3400 at a rally the second year We had it and they were also whisper quiet for the remaining 5 years we had it.
|
|
|
06-07-2015, 05:38 PM
|
#17
|
Montana Master
Join Date: Aug 2010
Location: Washington Coast
Posts: 2,688
M.O.C. #10696
|
Your on a good roll Rich ,I hope your problems you've had are a thing of the past and you can finally start enjoying that beautiful Big Sky
__________________
[
|
|
|
06-09-2015, 02:09 PM
|
#18
|
Montana Master
Join Date: Jan 2013
Location: Depends on temps
Posts: 1,648
M.O.C. #13157
|
Looks way to organized to me. Great job... Jim
__________________
2012 Ram Laramie 3500 DRW 4x4 3.73 Tow Max Pkg B&W Companion 60 gal RDS aux fuel tank. 2014 Montana 3150RL, 2 A/C's, Leather, 6 Point Jacks, Splendede WD2100XC, Mor/ryde X-Factor, Duravis 250 tires with TST 507RV monitors. 2 x Honda EU2000's
|
|
|
06-09-2015, 04:47 PM
|
#19
|
Montana Master
Join Date: Aug 2010
Location: Washington Coast
Posts: 2,688
M.O.C. #10696
|
Credit that to my better half ,she is a CLEAN FREAK and EVERYTHING is neatly organized and Clean,if it was just me living in this 5er it would look like the City Dump
__________________
[
|
|
|
06-10-2015, 02:56 AM
|
#20
|
Montana Master
Join Date: Jan 2005
Location: North Ridgeville
Posts: 20,229
M.O.C. #2839
|
We are pretty much out of the travel mode this summer due to medical issues and the Montana will probably not leave the driveway this summer. We have a big "to do"list and one item is to replace every dinky staple that I can with screws. We have already reinforced the shelves. We are replacing the interior lighting with LED lighting and that is about half done. This top of the line, best you can buy Big Sky came OEM with those dome lights and 921 bulbs.
I hope this is the end of the "things that break" era. The BIG sky is 3 years old this month and we have had over 4,000.00 in failures. Warranty and
Service plans covered most all of the expense.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|