|
03-30-2011, 03:05 AM
|
#1
|
Montana Master
Join Date: Mar 2003
Location: Albuquerque
Posts: 703
M.O.C. #235
|
Wet bolts installed
I just finished installing wet bolts on the 5er. This was my 1st real suspenion repair on any vehicle I've owned so I want to THANK everyone who posted comments on MOC and E-mails I recieved to help me with the install. Now it took me much longer than most but I like to take my time it would have been easier w/ with helper. Without the tread I wouldn't have attempted this project.I guess I had about 26k on the 5er towing. I didn't expect to see that much wear on those parts I replaced. I feel I would have broken at least one of the center hangers on my summer trip or more. So again Thanks to All who helped. Jack
|
|
|
03-30-2011, 03:26 AM
|
#2
|
Montana Master
Join Date: Jul 2006
Location: K.C.
Posts: 11,731
M.O.C. #5980
|
Glad you got them changed Jack. Good job!
|
|
|
03-30-2011, 05:10 AM
|
#3
|
Montana Master
Join Date: Jan 2006
Location: South
Posts: 2,499
M.O.C. #5140
|
Congratulations. It is satisfying, isn't it, when you tackle a pretty big job and get it done properly.
|
|
|
03-30-2011, 06:22 AM
|
#4
|
Montana Master
Join Date: Oct 2009
Location: Indian Land
Posts: 1,142
M.O.C. #9808
|
Jack,
Wet Bolts are on my list of thing to do. Just need time away from work to do it. Next long trip will be Fall Rally, so maybe I can get it done before then. I think I have around 15,000 miles on the Monty right now.
Should be easier now that I have BigFoot installed, and can press a button and get all four tires off the ground.
Did you take any pictures?
|
|
|
03-30-2011, 07:08 AM
|
#5
|
Montana Master
Join Date: Oct 2008
Location: Siloam Springs
Posts: 2,206
M.O.C. #8890
|
Way to go, we had oval bolt holes with less than 10,000 miles.
|
|
|
03-30-2011, 07:12 AM
|
#6
|
Montana Master
Join Date: Dec 2004
Location: Bum F Egypt
Posts: 979
M.O.C. #2733
|
|
|
|
03-30-2011, 11:03 AM
|
#7
|
Montana Master
Join Date: Oct 2009
Location: Navarre
Posts: 1,527
M.O.C. #9765
|
With Bigfoot and a small jack you should have them installed in a couple of hours if you don't have to cut any of the old bolts out.
Mike
|
|
|
03-30-2011, 11:38 AM
|
#8
|
Montana Master
Join Date: Mar 2003
Location: Albuquerque
Posts: 703
M.O.C. #235
|
Ron H. thanks for the instructions Tweetys don't put them in the box.Also someone posted to have it hooked to TV to save the landing leg well I read that after I jacked up the dr. side I didn't hurt anything but it was 10 times harder to jack up on blocks when unhooked than hooked to TV. Thanks again, Jack
|
|
|
03-30-2011, 02:25 PM
|
#9
|
Montana Master
Join Date: Nov 2005
Location: Paola
Posts: 5,739
M.O.C. #4961
|
Glad you mastered the task.
__________________
Dennis & Linda Ward
Paola, Kansas
Montana 3735MK Legacy Edition
1200 watts of Solar
|
|
|
03-30-2011, 04:40 PM
|
#10
|
Montana Master
Join Date: Oct 2009
Location: Indian Land
Posts: 1,142
M.O.C. #9808
|
So which one does everyone use, the Dexter HD suspension kit or Mor/Ryde wet bolt. I have have the Mor/Ryde thing in the middle, looks like Dexter HD suspension kit would replace that. Not sure which would be better on 2010 Montana.
|
|
|
03-30-2011, 05:54 PM
|
#11
|
Montana Master
Join Date: Oct 2008
Location: Siloam Springs
Posts: 2,206
M.O.C. #8890
|
Quote:
quote:Originally posted by 7.3Ford
So which one does everyone use, the Dexter HD suspension kit or Mor/Ryde wet bolt. I have have the Mor/Ryde thing in the middle, looks like Dexter HD suspension kit would replace that. Not sure which would be better on 2010 Montana.
|
The Dexter HD suspention kit is for those without Mor/Ryde suspention.
|
|
|
03-31-2011, 01:55 AM
|
#12
|
Montana Fan
Join Date: Jul 2007
Location: Troy
Posts: 152
M.O.C. #7406
|
John Mit want to check you may already have them. I have a 2010 and it came from the factory with wet bolts. It was a mid year change for 2010.
|
|
|
03-31-2011, 12:21 PM
|
#13
|
Montana Master
Join Date: Oct 2009
Location: Indian Land
Posts: 1,142
M.O.C. #9808
|
Quote:
quote:Originally posted by jim n deb
John Mit want to check you may already have them. I have a 2010 and it came from the factory with wet bolts. It was a mid year change for 2010.
|
Nop mine doesn't have them. I have torqued them a couple times. I have an early 2010.
|
|
|
04-06-2011, 11:38 AM
|
#14
|
Montana Fan
Join Date: Feb 2011
Location: Silverton
Posts: 489
M.O.C. #11144
|
I will have to check under my 2011 and see if there are grease fittings.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
Wet Bolts
|
1retired06 |
Maintenance |
8 |
04-10-2015 02:27 AM |
wet bolts
|
Happycamperscolorado |
General Discussions about our Montanas |
14 |
12-25-2014 02:21 AM |
New U-Bolts
|
pbahlin |
Additions & Improvements |
24 |
03-12-2011 09:42 AM |
Wet bolts
|
jliveit |
General Discussions about our Montanas |
16 |
02-17-2011 03:35 PM |
Wet Bolts Installed
|
hookman |
Maintenance |
7 |
08-18-2009 05:47 PM |
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|