Go Back   Montana Owners Club - Keystone Montana 5th Wheel Forum > MOC on M.A.R.S. > Additions & Improvements
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 06-16-2020, 10:15 AM   #1
ColoradoPriorMarines
Established Member
 
ColoradoPriorMarines's Avatar
 
Join Date: Jul 2017
Location: CO Western Slope
Posts: 42
M.O.C. #20169
Dinette table & 4 chairs

We used to have a 2011 Montana with a stand alone table and 4 chairs. Our new Montana has a small slide-in table and two chairs. An outside TV area is built into a cabinet under the table.

We would like to have a dinette table and 4 chairs like was in our 2011 Montana. I would take out the TV enclosure.

Does anyone know where I could get a dinette table and chairs like was in an older unit?
__________________

John & Lisa
2008 F450 | 6.4 PS | full delete | FASS system
2nd Montana - 2018 3811MS
ColoradoPriorMarines is offline   Reply With Quote
Old 06-16-2020, 11:16 AM   #2
Charlie 3931fb
Montana Master
 
Join Date: Mar 2020
Location: Waynesville
Posts: 530
M.O.C. #25947
Camping world sell a lot of RV furniture. I am sure you might find something there that you would like..
__________________
Charlie & Sofia
Sawyer (The Lawyer) Buster Brown Fur - babies

46 years married (Dam I been in prison that long)
Charlie 3931fb is offline   Reply With Quote
Old 06-16-2020, 11:39 AM   #3
jcurtis934
Montana Master
 
Join Date: Sep 2013
Location: Pensacola (mail forward service)
Posts: 2,986
M.O.C. #13740
I think your best bet is to find out the name of the furniture supplier for the montana line and contact them OR a trailer salvage yard in your area, indiana, or southern Michigan. That hunk of metal through the wall for the outside television will be an expensive thing to remove and repair as it will interfere with the two chairs next to the slide out wall. Good luck.
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
jcurtis934 is offline   Reply With Quote
Old 06-16-2020, 12:12 PM   #4
WeBeFulltime
Montana Master
 
WeBeFulltime's Avatar
 
Join Date: May 2011
Location: Hixson
Posts: 3,215
M.O.C. #11397
There is a forum section for items wanted to buy. Might want to list there as sometimes people remove them to set up an office in that space. You never know until you ask and you might find exactly what you want at a bargain. I have seen members give things for free to other members.
__________________
2018.5 Montana 3791RD


Full Timers 9/1/2010 through 1/16/2020.
WeBeFulltime is offline   Reply With Quote
Old 06-16-2020, 12:52 PM   #5
DQDick
Montana Master
 
DQDick's Avatar
 
Join Date: Jun 2011
Location: Wilsey
Posts: 17,564
M.O.C. #11455
Bradd and Hall in Elkhart, IN will build you what you need. Not cheap but our desk they built for us is beautiful.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
2017 3500 Dodge Maxi DRW 4X4, Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, etc.
DQDick is offline   Reply With Quote
Old 06-16-2020, 01:59 PM   #6
dhuhn
Montana Fan
 
dhuhn's Avatar
 
Join Date: Mar 2015
Location: Sequim
Posts: 233
M.O.C. #17176
Send a message via MSN to dhuhn
Doesn’t that table expand so you can use 4 chairs with it ?
__________________

Dan & Sandy Huhn
2016 Montana 3720 2015 Chevy 3500 SWD Duro Max
Prev 2012 High Country 313RE 2012 Chevy 2500 DMax
dhuhn is offline   Reply With Quote
Old 06-16-2020, 02:05 PM   #7
GHallof
Seasoned Camper
 
GHallof's Avatar
 
Join Date: Oct 2019
Location: Louisville
Posts: 86
M.O.C. #25098
C'mon MARINE!!! Who needs a table!
__________________
Gordon & Victoria Hallof
Louisville, Ohio
2007.5 Dodge Ram 3500 6.7l Cummins Full Delete
2017 3661RL
GHallof is offline   Reply With Quote
Old 06-17-2020, 04:36 AM   #8
RMcNeal
Montana Fan
 
RMcNeal's Avatar
 
Join Date: Oct 2019
Location: Jacksonville
Posts: 498
M.O.C. #25165
Two suppliers I have used is Trekwood, https://www.trekwood.com/index and Bontragers, http://bontragers.com/. Never tried any furniture yet, but they do list several items. Bontrager's specifically states Dinette tables.
__________________
Robert & Diana McNeal
2019 Montana Legacy 3791RD 20th Anniversary Edition
2014 F350 4x4 6.7L SRW
RMcNeal is offline   Reply With Quote
Old 06-28-2020, 03:02 PM   #9
Dmelvin
New Member
 
Join Date: Oct 2019
Location: McDonough
Posts: 8
M.O.C. #25121
I have a brand new on for sale but attaches to the wall. Comes with 4 chairs. We’re in FL
Dmelvin is offline   Reply With Quote
Old 06-28-2020, 07:29 PM   #10
GrayPDX
New Member
 
Join Date: Feb 2018
Location: Portland
Posts: 7
M.O.C. #21175
Your dining room setup should be the same as my 3790RD. The table will slide out so you can seat 4. And you should've had 4 chairs in the rig when you bought it. 2 regular and 2 fold up chairs - the fold ups were in my underbed storage when I got mine. And unless there's another reason why you want a stand alone dinette set, and don't have the 2 fold up chairs - you might even call Keystone and see if you can buy 2 fold up chairs from them. Certainly a lot cheaper that a whole dinette set.
__________________
2018 3790RD
2016 F350 6.7L, Super Crew Cab
GrayPDX is offline   Reply With Quote
Old 06-29-2020, 07:59 AM   #11
ColoradoPriorMarines
Established Member
 
ColoradoPriorMarines's Avatar
 
Join Date: Jul 2017
Location: CO Western Slope
Posts: 42
M.O.C. #20169
Dinette table

Our current table could accomodate chairs - however, we much prefer the table and chairs in our 2011 3400RL and would like to put that same table and chairs in our new unit. I would like to remove the cabinet around the outside TV and have those extra inches at the dining area.
__________________

John & Lisa
2008 F450 | 6.4 PS | full delete | FASS system
2nd Montana - 2018 3811MS
ColoradoPriorMarines is offline   Reply With Quote
Old 06-29-2020, 08:48 AM   #12
mlh
Montana Master
 
Join Date: Oct 2004
Location: Salem
Posts: 5,580
M.O.C. #2283
I don’t know so I will ask. Will your slides all close if you add a table that big where there was there was a smaller table?
Lynwood
__________________
www.harrellsprec.com
Lynwood Harrell
323 RL HC 2008 F250
mlh is offline   Reply With Quote
Old 06-29-2020, 09:34 AM   #13
Preston & Terri
Montana Fan
 
Preston & Terri's Avatar
 
Join Date: Aug 2014
Location: On the Road
Posts: 160
M.O.C. #14645
https://www.ikea.com/us/en/p/ekedale...rown-20340824/
__________________
Retired FULLTIMERS that Travel & Work -- 2020 3931FB Legacy Edition -- OEM Sailun S637T's -- 2017 F350 DRW, 4.10 axle, 6.7L -- PullRite Super-5th 18K hitch -- Dish Network w/ Winegard G2 automatic portable antenna -- 50A Surge Guard portable -- WiFi Ranger Elite -- Blue Streak -- YourBestAddress.com -- RVSA Certified Technician -- The UnBeetable Experience
Preston & Terri is offline   Reply With Quote
Old 06-29-2020, 10:34 AM   #14
GeorgeP.
Established Member
 
GeorgeP.'s Avatar
 
Join Date: May 2018
Location: Delta
Posts: 18
M.O.C. #21730
https://youtu.be/jOmpRrNwSzo watch this video!
GeorgeP. is offline   Reply With Quote
Old 06-30-2020, 10:47 AM   #15
ColoradoPriorMarines
Established Member
 
ColoradoPriorMarines's Avatar
 
Join Date: Jul 2017
Location: CO Western Slope
Posts: 42
M.O.C. #20169
My current 3811MS has an outside TV on the other side of the wall from the dinette. Inside, there is a "cabinet: that houses the outside TV and the structure for the current wall-mounted table. I plan to remove the outside TV, the inside "cabinet" and the wall mounted dinette.

The slide dimensions are the same as my 2011 3400RL.

Plus, the table like the one in my 2011 would swivel to the short side so the slide would close.
__________________

John & Lisa
2008 F450 | 6.4 PS | full delete | FASS system
2nd Montana - 2018 3811MS
ColoradoPriorMarines is offline   Reply With Quote
Old 06-30-2020, 03:39 PM   #16
ColoradoPriorMarines
Established Member
 
ColoradoPriorMarines's Avatar
 
Join Date: Jul 2017
Location: CO Western Slope
Posts: 42
M.O.C. #20169
Yes, that is our unit. I just like the chairs and table in my 2011 unit better.
__________________

John & Lisa
2008 F450 | 6.4 PS | full delete | FASS system
2nd Montana - 2018 3811MS
ColoradoPriorMarines is offline   Reply With Quote
Old 07-03-2020, 02:39 PM   #17
Briarglenn
Seasoned Camper
 
Join Date: Dec 2006
Location: The Dalles
Posts: 76
M.O.C. #6613
Trekwood
Briarglenn is offline   Reply With Quote
Old 07-04-2020, 04:35 PM   #18
Gpwyatt
Established Member
 
Join Date: Apr 2020
Location: Cheyenne
Posts: 13
M.O.C. #26106
I have a 2020 3854BR and within a week the two extra fold up chairs for the dinette that are grey cloth broke through the wood where the pins are under the seat when my 165 lb son sat in them in the bunk area at the desk. The wood they use is a very soft pine and the pin holes are placed along the edge so they will simply split the chair frame. I tossed them in the dumpster. Called both dealer and keystone to buy 2 more of the fixed dinnette chairs and was told, oh we can’t get those anymore. Keystone has a massive importer of cheap Chinese made chairs that they order from the massive supplier there in Goshen IN and they never know when and what he will have in inventory. After big production runs they often are forced to change styles, material patterns and colors based on availability. In other words you are SOL. I’m just going to a local furniture store and getting something as close as possible and calling it a day.
Gpwyatt is offline   Reply With Quote
Reply

Tags
chairs, dinette, table

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 11:40 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
×