|
|
07-22-2018, 04:19 PM
|
#21
|
Established Member
Join Date: Dec 2017
Location: Moose Jaw
Posts: 24
M.O.C. #20969
|
Short Box Fifthwheel towing
Quote:
Originally Posted by mtheo
A friend just got a nice Chevy Duramax to tow a future 5er, I think it has a 5 or 5-1/2' foot bed. Has anybody tried that and will a slider work without damage to truck. Seems short.
|
I have a Montana 3810 and pull it with a 2009 Ram MegaCab which has only a 6'5" box. I have no slider and can turn to near 90 degrees
|
|
|
07-22-2018, 05:24 PM
|
#22
|
Montana Master
Join Date: Aug 2015
Location: SWFL
Posts: 964
M.O.C. #17801
|
Used a PR auto slider for my F150 5-1/2' bed. That PR was designed for an F150 and had 22" of travel. Now have a 6-1/2' bed and a Demco Hitchiker auto slider that only travels about 16". My Montana has corner cutouts but still gets very close to the back window, although I can get to 90 degrees on level ground.
__________________
2016 Montana 3711FL
2005 Ford F350, 6.0 diesel, short bed
Demco Hitchiker Auto Slide hitch
|
|
|
07-22-2018, 05:35 PM
|
#23
|
New Member
Join Date: Nov 2017
Location: Kennewick
Posts: 4
M.O.C. #20837
|
ditto Anderson Ultimate
Quote:
Originally Posted by footz1941
I have an Andersen Ultimate 20K with a short bed Ram can go nearly 90 degrees with no problem No chucking Very easy to hook and unhook Hitches are like trucks Whatever you have is best
|
I have a shortbed Ford F350 and also use an Anderson Ultimate. Montana's front end are designed to be able to turn tighter radius even with a shortbed tv.
|
|
|
07-22-2018, 06:23 PM
|
#24
|
New Member
Join Date: Mar 2018
Location: Indian Head Park
Posts: 4
M.O.C. #21396
|
I have a F250 short bed and have hauled 3 different 5ers with no problems. Most of the time I don’t even use the slide.
|
|
|
07-22-2018, 07:03 PM
|
#25
|
Established Member
Join Date: Oct 2015
Location: mcminnville
Posts: 34
M.O.C. #17968
|
short bed Ram
I have a 2015 Ram 1 ton short bed, i tow a 2016 3790 Montana 40'
i have the removable B&W hitch, no slider have never had a problem,
the newer 5th wheel front caps are more rounded allow for more clearance.
|
|
|
07-22-2018, 07:04 PM
|
#26
|
Montana Master
Join Date: Aug 2015
Location: SWFL
Posts: 964
M.O.C. #17801
|
Quote:
Originally Posted by LPower561
I have a shortbed Ford F350 and also use an Anderson Ultimate. Montana's front end are designed to be able to turn tighter radius even with a shortbed tv.
|
While that is mostly true and my 3711FL has those corner cutouts, I touched the front corner of the FW to the cab maneuvering at a gas station. No damage other than rubbed paint, but now I can get to 90 degrees with the slider if need be.
|
|
|
07-22-2018, 07:13 PM
|
#27
|
Montana Master
Join Date: Dec 2009
Location: Sebring
Posts: 3,659
M.O.C. #9969
|
If we lived in a perfect world and all roads and driveways were perfectly level with each other it would be true that you wouldn't need a slider. BUT, we don't and when the TV twist one way and the RV twist the other and you're approaching 90 degrees listen for the POP of that rear window.
Go check any number of other forums and read of those who got by for years until Murphy finally caught up to them and they are now replacing a rear window.
__________________
Michelle & Ann
2018 Chevy 3500HD High Country DRW 4X4 Crew Cab w/Duramax/Allison, Formally 2010 Montana 2955RL, Now Loaded 2016 SOB, Mor/ryde IS, Disc Brakes & Pin Box, Comfort Ride Hitch, Sailun 17.5 Tires.
|
|
|
07-22-2018, 07:32 PM
|
#28
|
Montana Master
Join Date: May 2010
Location: Rock Island
Posts: 1,074
M.O.C. #10457
|
We have a 2017 F350 SRW Short Bed towing a 2013 Montana 3725 and have a Demco Hijacker Autoslider Hitch and it works great. Just returning from a loop from TN up to Calgary(Stampede) and have cut all kinds of short turns pulling and backing on uneven ground and have had no issues with the Demo Hijacker Autoslider. We use a slider as a way to have one less thing to worry about.
|
|
|
07-22-2018, 08:00 PM
|
#29
|
Montana Master
Join Date: Oct 2013
Location: Ogden
Posts: 638
M.O.C. #13862
|
I pulled a 40ft Montana 5'er for 5 years with a Ram 3500 SRW with a 6.5ft bed and an Andersen Ultimate hitch. Never a single problem and now I have a new 5'er to replace the Montana. If you've never looked at the Andersen, you really should.
|
|
|
07-22-2018, 09:29 PM
|
#30
|
Established Member
Join Date: May 2018
Location: Edmonds
Posts: 10
M.O.C. #21864
|
Would never tow without a slider with a short bed. I have a 2016 1 ton Chev with 6’ bed and use the Demco 18k auto slider, Love it!
Never have to worry even in full jack knife it never comes close to cab and I don’t hav to get out and pull pins it does it all.
It is a bit tougher to load with the capture plate being on the hitch so you have be be lined up well. Hope this helps you.
While the Pull Rite is nice I like the Demco better.
|
|
|
07-23-2018, 05:00 AM
|
#31
|
New Member
Join Date: Jul 2018
Location: Rockingham
Posts: 1
M.O.C. #22207
|
Auto slider
We had some tight turns on roads not really designed for large rigs due to bypassing flooded areas this weekend and I was really glad an automatic slider was in the bed. Demco 18k works good with a tip to say when the instructions state the capture plate should be within 1/8" on either side of the trailer's hitch - follow the directions.
|
|
|
07-23-2018, 07:20 AM
|
#32
|
Montana Master
Join Date: Oct 2015
Location: westminster md
Posts: 2,318
M.O.C. #17894
|
Everyone situation is different. Just to get to the first main road from my house I have to maneuver around 5 sharp 90 degree turns. A short bed with a slider would just be a pita for me.
Also when I return home I have to get the rig turned around at the house which requires more sharp turns.
|
|
|
07-23-2018, 10:33 AM
|
#33
|
Montana Master
Join Date: Dec 2007
Location: Kansas City, Missouri
Posts: 2,707
M.O.C. #7992
|
Quote:
Originally Posted by JetMech
I had a slider for about 5 years. I had a couple of issues with it. First and foremost you better not forget to let your tailgate down BEFORE you slide your hitch. Unless your pinbox is set really high, the aft end of you pinbox will hit the front side of your tailgate. Now, you're in a real predicament because your hitch is LOCKED in the rear position and it's jammed into your tailgate so bad you can't get your tailgate to unlock. Plus it will damage your tailgate. The other issue is the loud clunking sound when starting and stopping. A slider has to be able to slide, so the mechanism has to have a good bit of slop in it to work. All this slop makes a lot of banging back and forth when starting and stopping. This can't be good for the hitch or the RV.
|
Pulled over 73k with two manual sliders. First a Reese & then a Curt. Have never experienced either of these issues. Only bad thing about manual sliders is you have to remember to use them. Always use it in camp grounds and getting the 5'er in my driveway. Only two other times was it required. Both times in filling stations.
__________________
2006 3000RK
2009 Ram 2500
|
|
|
07-23-2018, 01:19 PM
|
#34
|
Montana Master
Join Date: Jan 2005
Location: North Ridgeville
Posts: 20,229
M.O.C. #2839
|
Quote:
Originally Posted by AZ Traveler
Its great to be an American with lots of options. One size rarely fits all. For some, they don't care to use a long bed as a daily driver, live in a more congested area where parking can be a real challenge or the long bed will not fit in their garage. A slider is a lot less expensive than a garage remodel or a new house. Agree that a long bed is a better tow vehicle but some can't afford a dedicated tow vehicle.
|
I agree Both of our F-350's have been long beds and a dedicated tow vehicle. The F-350 crew cab, long bed is a pain to drive. When on a road trip when we stay at a CG we do have to drive it for our sightseeing and it is no fun. We are always looking for a Dually parking spot. There is about 20 things we can not do with a long bed dually but we purchased it to tow a heavy 5th wheel.
|
|
|
07-23-2018, 01:38 PM
|
#35
|
Established Member
Join Date: Jun 2018
Location: Gladstone
Posts: 27
M.O.C. #22008
|
We have a Blue Ox Super Ride for our short box.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|