MOR/Ryde SRE/4000 Suspension Upgrade

[Harrisden54]

I have a 2019 Montana HC 384BR with the Lippert Road Armour suspension equalizer. I am considering changing to the MOR/Ryde SRE/4000 with the XFactor crossmember and heavy duty shackles with wet bolts. The heavy duty shackles and wet bolts are a definite, but not sure about the SRE/4000 equalizer.
The OEM Road Armour has 3" of travel and the SRE/4000 4". Not sure if the extra inch is worth the $500 cost.
Has anyone switched to the SRE/4000 or the XFactor crossmember and if so, what were the results.
Thanks for any input.

[Golfmedik]

I will be adding the XFactor to our unit when it comes back from the factory. Way too much stress on just the hangars.

[wecker1]

I made the upgrade last year on our 3791RD and in my opinion it made a significant difference. The IS suspension is the ultimate upgrade but since we put limited miles a year on our unit I couldn't justify the cost. I did the upgrade myself but it's really a two person job. Used the Lippert levelers to raise the unit and then supported with jack-stands. Estimated start to finish was approx. 6-8 hours. Good luck and be safe!

[joe1047]

Hello, on my 2014 3425re Montana, i had the x factor on all 3 hangers, the worked great for 6 years. Now i have a 3121rl with legacy package, with road armor. I called keystone, they will not warranty the hangers if i put them on. Not sure what to do, because the frame has a 3 year warranty on it.dont know if your worried about the warranty but thats what keystone told me. Good luck