Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Montana Owners Club - Keystone Montana 5th Wheel Forum > MOC Technical Forums > Repairs & Service
Click Here to Login

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 07-03-2014, 04:39 AM   #1
Parkranger07
Established Member
 
Join Date: Jan 2012
Location: Sarasota
Posts: 10
M.O.C. #12093
New slide cover awning

I have a 2012 Montana 3400RL. I bought this at Lazy Days in Tampa, FL.
On the lot were 3400RL's that had slide awnings installed from the factory. Mine how ever did not as none of them had the level up system which I wanted. The kitchen slide awning had the anchor bracket actually on the top flange not below it like all of the others slides. This was because of the top refrigerator vent was too close to the corner for the bracket to go there. Now all of these as I'm describing were brand new from the factory. I had Camping World install awnings on all the other slides other than the kitchen slide. However, they would not install it on the kitchen because of the location the bracket had to be. I returned to Lazy Days at a later date and they would not install it there either. Sounds crazy to me.
Has anyone out there had this same problem? Has any one had problems with one that was installed as I described from the factory? I am ready to put one on myself but not sure of the screw size for that bracket. I would sure appreciate any feed back.
 
Parkranger07 is offline   Reply With Quote
Old 07-03-2014, 07:13 AM   #2
WeBeFulltime
Montana Master
 
WeBeFulltime's Avatar
 
Join Date: May 2011
Location: Hixson
Posts: 3,436
M.O.C. #11397
Our previous Montana, a 2008 3400RL came from the factory with toppers on all 4 slides. They were A & E toppers and looked/functioned good. Not a problem with them for 4 years.
__________________
2018.5 Montana 3791RD


Full Timers 9/1/2010 through 1/16/2020.
WeBeFulltime is offline   Reply With Quote
Old 07-04-2014, 05:06 AM   #3
jcurtis934
Montana Master
 
Join Date: Sep 2013
Location: Pensacola (mail forward service)
Posts: 3,198
M.O.C. #13740
Our 3800RE has the fridge about three feet in from the corner of the slide so that the slide topper brackets are all mounted the same...ie, on the very top area of the slide BUT NOT on the slide flange area. Of course, since you saw that the factory had done it to several units that were on the lot then someone at the factory thought it okay. It isn't like there is a lot of tension being applied to the mounting points from the slide toppers... I just my question would be 'did the factory put some kind of backing structure behind the flange when they installed the slide topper in that area? Not much help to you, just thoughts. John
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
jcurtis934 is offline   Reply With Quote
Old 07-04-2014, 09:48 AM   #4
DQDick
Site Team
 
DQDick's Avatar
 
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
Tiara RV in Elkhart put our slide toppers on and either cut down a bracket or bought one that goes around the frig vent. My guess would be they bought it, but who knows. It has more screws in it and is cut to fit around the vent, but other than that it's the same hardware the other toppers have.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
DQDick is offline   Reply With Quote
Old 07-05-2014, 08:06 AM   #5
1retired06
Montana Master
 
Join Date: Feb 2012
Location: Lake Gaston
Posts: 8,773
M.O.C. #12156
When we bought our 2010 and added the toppers,the dealer first indicated thay toppers could not be installed because of the upper fridge vent. 5 minutes after I pulled out the dealer called me back. A keystone rep was on site and gave instruction along the lines you described. Tell the dealer to. Call keystone and then get on with the installation.
__________________
Mike and Lorraine
2002 3655 FL, 2005 3650RK
2010 3665RE, 2015 3910FB
F350 crew cab dually 6.7
1retired06 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Why can't the Awning always cover the entry door?? RRman What I'd like to say if... 1 03-18-2015 07:49 PM
installing slide cover on slide w/refig. craigb General Discussions about our Montanas 3 02-02-2015 01:47 AM
Slideout awning cover Snowbirds General Discussions about our Montanas 10 07-30-2009 07:46 AM
slide out awning cover genecurp Montana Problems, Problem Solving & Technical Help 3 09-19-2006 06:31 AM
Carefree Combo slide cover/window awning Gypsy General Discussions about our Montanas 2 01-08-2005 10:47 AM

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 02:23 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.