Pinbox part no?

[philhyde]

We have a 2010 Montana Mountaineer 345-DBQ. I'd like to know the part number of the pin box so that I can order a suspension pin box. From my crude measuring and a picture from the Lippert website, it looks like I have a 1716.

http://lci1.com/index.php?option=com...inbox&catid=34

Thanks for any tips!

[WeBeFulltime]

Mine has a label on the side of it and the last 4 digits are the number you need. Mine is 1716. Hope this helps.

[philhyde]

This is the label on mine.

[8.1al]

Ours has a metal tag with the pinbox # on it

[philhyde]

The only metal tag on mine has the VIN.

[jsmitfl]

Send that picture to Lippert and they willl know what to replace it with.

[Recumbent]

We have the 1716 Pin Box and replaced it with a Trail Air Triglide LO7 Model Number 229669 Mfg Date: 11/21/2011

[mazboy]

you can call lippert too. http://www.lci1.com/index.php?option...260&Itemid=263


hi recumbent too.

[philhyde]

Thanks for the replies.

I called Lippert and their records indicate that the chassis was provided with an 1116 pin box. They recommended that I download the Trailair brochure which has measuring instructions to be sure.

[TLightning]

Double check the number. The number put on our pin box was wrong, resulting in us coming very close to ordering the wrong air pin box replacement.

[philhyde]

Thanks. Can Lippert look it up by the VIN?

[dieselguy]

If you just go by your original post link ... click on "View Dimensions" ... go out and measure what you have. The pinbox models are different enough that you can go wrong with your own measurements. You'll have your measurements right in front of you with no second guessing. Match up what you have to the correct pinbox listed on that website.

[Trailer Trash 2]

the pin box you posted looks like the one I just took off my Monty, do you need a new pin box? if you do I can give you my old one, or are you going to put in a Trail Air replacement.

[philhyde]

Looking to replace mine with a suspension ride one.