![Reply](/forums/images/mo/buttons/reply.gif) |
04-24-2018, 02:12 PM
|
#1
|
Montana Fan
Join Date: Apr 2010
Location: Everett
Posts: 189
M.O.C. #10319
|
TST 507 TPMS Repeater
Wanted to share with this with the group. We originally had a 36' Mountaineer with the TST 507 TPMS. It worked great and warned as twice on one trip to Canada about tires failing (Marathons). Would not want to be without it.
We have now had a 3790RD for about a year and noticed that the system was not always reliable. Sometimes it would beep that it was no longer getting a signal from one of the tires. Sometimes it would not beep but the reading was clearly out of date. I searched on here and found that the general consensus was you did not need the repeater. I contacted TST and they were very helpful, telling me I did need the repeater (all new kits come with it btw now).
So I installed it last weekend. I wired it into the battery bay on the wall at the back, and then ran wires to the panel which has the LCI leveling control panel. There was a little space there to add a switch. I am happy that its a neat install. We only drove briefly back to storage - but certainly it worked fine then. Hopefully on longer drives it will prove to have fixed our problems.
Wanted to share in case others were having some lack of stability with the TST system. Overall, if I can get it stable again, I am very happy with it.
|
|
|
04-24-2018, 03:57 PM
|
#2
|
Montana Master
Join Date: Oct 2006
Location: McKinney
Posts: 7,344
M.O.C. #6433
|
I was having the same occasional signal losses you were. Added the repeater last year and so far no loss. I mounted mine inside my truck back window since I have a 12v outlet under the back seat. Added a switch in line so I can turn it off and on when towing or not.
__________________
Bill & Patricia
Riley, our Golden
2007 3075RL (recently sold, currently without)
|
|
|
04-24-2018, 05:03 PM
|
#3
|
Montana Master
Join Date: Apr 2016
Location: Auburn
Posts: 879
M.O.C. #18474
|
I mounted the repeater in the front generator compartment on the side of the heat shield and wired it directly to the batter with an inline fuse. I'd had the TPMS system for years, even with the external antenna and would periodically lose one of the tires. I haven't dropped a sensor since installing the repeater.
__________________
2020 Montana 3790RD Legacy EditionOnan, TST TPMS, TrailAir pin, Discs,
2013 F350 DRW 4x4 CC LBViair 10007, Ride-Rites, Westin HDx, 12k Smittybilt
|
|
|
04-24-2018, 06:06 PM
|
#4
|
Established Member
Join Date: Jun 2008
Location: Tipp City
Posts: 27
M.O.C. #8596
|
I spliced a cigarette lighter plug onto my repeater and plugged it into the 12 volt outlet in the basement, then I used double sided sticky tape to mount it to one of the joists. Not an overly fancy install, but works well, is up out of the way, and when I turn the battery disconnect off, it kills power to it.
__________________
2019 Montana 3791RD.
2015 Ford F-350 4x4 CC, DRW, 6.7L, 3.73's
|
|
|
04-24-2018, 07:54 PM
|
#5
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
Our old rig was too long and the new one is also so I've had one in the back window of the truck for 7 years. Works well.
|
|
|
04-24-2018, 07:55 PM
|
#6
|
Montana Master
Join Date: Oct 2012
Location: Box Elder
Posts: 4,774
M.O.C. #12947
|
We've had our TST 507 flow through for almost five years, and when I ordered it, I also ordered the repeater, and never regretted it, as it always has worked flawlessly. A little over three weeks ago, we were traveling south towards Sun City, and got the alarm. Turned out it was a valve stem that had come loose, and gave us plenty of time to safely get off the road. Would not want to run without the 507.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
|
|
|
04-24-2018, 08:51 PM
|
#7
|
Montana Fan
Join Date: Apr 2010
Location: Everett
Posts: 189
M.O.C. #10319
|
Good thread - thanks for the replies. Will hopefully be useful to others that may experience signal loss for their TST installs. Interesting to read how others have wired their repeaters in.
|
|
|
04-24-2018, 09:00 PM
|
#8
|
Montana Master
Join Date: May 2017
Location: South East NC
Posts: 1,768
M.O.C. #19865
|
Wired mine in the front storage above the batteries. Connected past the battery cut off installed so it is shut off when the batteries are shut down.
__________________
John & Patty
2022 3855 BR
2019 Lariat F350 4X4 Dually
|
|
|
08-20-2019, 01:22 PM
|
#9
|
Montana Master
Join Date: Jan 2008
Location: Portland
Posts: 1,107
M.O.C. #8045
|
I mounted mine beside the pin box and wired it into the junction box connected to the running lights circuit.
|
|
|
08-20-2019, 03:27 PM
|
#10
|
Montana Master
Join Date: Jan 2005
Location: North Ridgeville
Posts: 20,229
M.O.C. #2839
|
We are 53 feet long.We have never had the need for the repeater as the system works perfectly without it.We have had the system on two Montana's since 2006.
|
|
|
08-20-2019, 04:53 PM
|
#11
|
Montana Master
Join Date: Aug 2015
Location: Mena
Posts: 504
M.O.C. #17723
|
We also mounted the repeater on the forward storage back wall. Wired it to the running lights like the rear view camera. Always run with the lights on and now have 2 more tests to make sure we do....
__________________
Ron & Rhonda
2021 3230CK Montana Legacy w/ Super SolarFlex
(old rig) 2015 Montana 3611RL 8K I.S., Disk Brakes, Sailun Tires
2015 F350 XLT Crew Dually 20K B&W Companion
|
|
|
08-20-2019, 05:02 PM
|
#12
|
Montana Master
Join Date: Jan 2008
Location: Portland
Posts: 1,107
M.O.C. #8045
|
I have my receiver/monitor mounted lower on my dash between radio and steering wheel, about knee height. I am thinking that the position of the receiver may be the reason a repeater is needed.
|
|
|
08-20-2019, 05:52 PM
|
#13
|
Established Member
Join Date: Apr 2019
Location: LELAND
Posts: 18
M.O.C. #23808
|
Ditto what richfaa says.... 373RD with Ford F-350 Dually.... Repeater not needed... System works perfectly
|
|
|
08-20-2019, 06:11 PM
|
#14
|
Montana Master
Join Date: Oct 2015
Location: westminster md
Posts: 2,328
M.O.C. #17894
|
We are 57 foot long connected and have no issues without a repeater.
__________________
2018 Chevy 3500 LTZ Dually Diesel 4x4 CCLB
2011 Montana 3455 SA. 6 point level up. Disc brakes. Curt Q24 Hitch. 5 step glow steps
Progressive EMS. Valterra tank valves. Sailun G637 tires. ARP fridge control. All led lighting. Mor Ryde IS
|
|
|
08-20-2019, 06:40 PM
|
#15
|
Montana Fan
Join Date: Mar 2019
Location: Chino Valley
Posts: 226
M.O.C. #23720
|
Min max settings for txt 507
Just installed the TST 507. What do you all use for min max Settings?? Tire pressure is 110 so plus 25% for max pressure minimum? High temperature??
__________________
![](image.php?s=fcea3ea1ebffdf114da32de8c785a0e1&u=23720&type=sigpic&dateline=1563813638)
Steven & Denise
New to us 2014 3150RL
Chino Valley, AZ
|
|
|
08-20-2019, 06:59 PM
|
#16
|
Montana Master
Join Date: May 2017
Location: South East NC
Posts: 1,768
M.O.C. #19865
|
Quote:
Originally Posted by Sdgood1
Just installed the TST 507. What do you all use for min max Settings?? Tire pressure is 110 so plus 25% for max pressure minimum? High temperature?? ![Confused](images/smilies/confused.gif)
|
High temp is set at 158 at the factory and they suggest you leave it there.
|
|
|
08-21-2019, 07:56 AM
|
#17
|
Montana Master
Join Date: Oct 2015
Location: westminster md
Posts: 2,328
M.O.C. #17894
|
I have mine set to alarm the trailer tires (Sailun G637s) at 132 PSI. Truck tires at 90 PSI. Heat setting as default of 158 degrees.
Trailer tires generally run around 120-125 PSI depending on how hot it is. Temps around 100
__________________
2018 Chevy 3500 LTZ Dually Diesel 4x4 CCLB
2011 Montana 3455 SA. 6 point level up. Disc brakes. Curt Q24 Hitch. 5 step glow steps
Progressive EMS. Valterra tank valves. Sailun G637 tires. ARP fridge control. All led lighting. Mor Ryde IS
|
|
|
09-07-2019, 10:38 PM
|
#18
|
Montana Fan
Join Date: Nov 2015
Location: Shady Cove
Posts: 155
M.O.C. #18031
|
I did the same thing.
__________________
2015 GMC Denali 2500hd D/A
2016 Montana 3160rl Legacy
|
|
|
09-08-2019, 06:55 PM
|
#19
|
Montana Master
Join Date: Oct 2015
Location: westminster md
Posts: 2,328
M.O.C. #17894
|
Lucky23 I think you posted in the wrong thread
__________________
2018 Chevy 3500 LTZ Dually Diesel 4x4 CCLB
2011 Montana 3455 SA. 6 point level up. Disc brakes. Curt Q24 Hitch. 5 step glow steps
Progressive EMS. Valterra tank valves. Sailun G637 tires. ARP fridge control. All led lighting. Mor Ryde IS
|
|
|
09-08-2019, 07:01 PM
|
#20
|
Montana Fan
Join Date: Nov 2015
Location: Shady Cove
Posts: 155
M.O.C. #18031
|
Quote:
Originally Posted by beeje
Lucky23 I think you posted in the wrong thread
|
Beeje I was responding to OP I just did the same thing and put a lighted switch for my tpms extender in lippert control panel.
|
|
|
![Reply](/forums/images/mo/buttons/reply.gif) |
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|