Installing slide selector control

[grconner]

I just got a 2008 332pht bunkhouse (three slides). I would like to control the bunk slide. You can't get the slide control on the mountaineer from the factory. Has anyone installed a control? I did a search on this forum-nothing. I'm thinking of installing a valve on the bunk cylinder hose. I only have a 15 1/2 feet wide under cover area to park the unit. I now have to get it right in the middle for the slides on both sides to open. I'm not sure how the three cylinders are hooked together. Any help would be appreciated. gerry

[awaywego]

I ordered the selector valve direct from the pump company. the slides are in series, and with the selector they need to be separate, so I had to install another hydraulic line to separate the cylinders.
The hard part was getting the lines to the cylinders, but it can be done.