lcd install

[bob]

Hello I have a 2007 3075 I would would like to install a 32 ' lcd tv on front of cabinet the original tv sat on a 3/4 pice of pressed board ,I have looked at several mounts I would think the weight of the tv would pull board up . has anyone done this, if so would your share how You did it. Thank You Richard

[exav8tr]

Bob I have an '06 3400 that had a 26" TV. I had a carpenter build a brace for behind the TV out of 3/4 inch plywood and some angle iron. Best Buy came out and mounted an articulating arm on the brace and mounted the TV to it. We had to cut the cabinet frame and put new molding around it. The TV extends out of the cabinet and turns so we can see it from just about anywhere in the LR and dinette. It folds flat against the brace and I secure it with a strap when we travel. The TV is an HP 32" HD LCD. We added some heavier gear above the TV so we added a 3/4 inch piece of plywood under the panelling that was there for additional support. Hope this helps. I did post pictures last year when I had it done, You might find them in archives....

[bob]

Thanks Phill