Quote:
quote:Originally posted by BethandKevin
We had the same issue Vern. I fixed it myself by using #12 screws instead of the ones supplied. Drill the holes in the plate slightly larger to accommodate the larger screws. DO NOT ENLARGE THE HOLES IN THE DOOR. I've had no problem since. I tried epoxy as well-it broke loose. If you look closely at the original screws, there is very little thread to grip the fiberglass panel. It's been over a year since I repaired ours on both sides.
|
I'll try the # 12 Screws if that doesn't hold the bracket plate the next step will be mounting 1/2" lower with a 1/8" aluminum plate .
Thanks
Threaded Mode
