Installing SAT receiver

[jeffba]

Starting to move into our 3701LK. There are 2 places to install Sat Receiver.
Neither place has a 110 outlet and neither has a hole to route the cords.

I know it may sound nitpicky, but my definition of "satellite ready" is a lot different. There is a spare plug at the TV, but no way to cleanly route the power cable much less the HDMI. And if the DW wants to use her Blueray well she is out of luck.

guess I need to break out the sawsall......

[cpaulsen]

On my Montana HC.....our Dish Wally sits on a shelf/cabinet above the tv but no way to plug it in. 1" holesaw to get to the lower shelf with a 110 outlet. Problem solved.

[DQDick]

I also took a 1" hole saw and then used plastic sleeves, like you use for a desk, to line the edges of the holes. I ran mine behind the crappy DVD player and then fished it out the bottom like the DVD wires and then to the TV. Eventurally I took the crappy DVD player out and put a Blue Ray in and yes I did use a saw on that job.

[DadsHemi]

I to cut a 1”hole from the upper cabinet to the tv plug and put in a multi gang in the upper cabinet. Problem solved.

[jeffba]

yeah I know the hole saw will work Just had a low threshold of irritation lately. should be something that should be standard