|
|
04-18-2021, 07:47 AM
|
#21
|
Montana Master
Join Date: Mar 2013
Location: Frostproof, FL USA
Posts: 2,362
M.O.C. #13272
|
Quote:
Originally Posted by CADman_KS
In our old truck, I could barely see the top plate of the hitch, but I couldn't see the cutout. Over time, I learned where to put the base plate on the 5er with regards to the hitch, and could hit it almost every time.
MM mentioned it above, but the new trucks with the cameras above the bed are really the bomb, and they spoil you in a hurry for sure. I new truck has one of those, and now knowing EXACTLY what is going on is much much easier.
In the end, though, it's really all about practice. The more you hitch, the better you get at, or you find little tricks to make it easier. Be patient, you'll get there...
|
Probably the fifth or sixth time I hitched up with my new truck I discovered the button to press to get the roof view camera to come on. It was an unbelievable view of my king pin and fifth wheel plate, along with a line drawn in between them! Now if I can just keep remembering to use this feature I'll be happy.
__________________
Previous: 2008 Montana 3400RL & 2014 3725RL
Current: Full Time 2022 SOB TT Toy Hauler
|
|
|
04-18-2021, 07:51 AM
|
#22
|
Seasoned Camper
Join Date: Apr 2009
Location: adin
Posts: 82
M.O.C. #9226
|
viewing hitch
I put apiece of pin stripping tape on the rear window. It lines up with the center of the hitch works great
|
|
|
04-18-2021, 11:34 AM
|
#23
|
Montana Master
Join Date: Feb 2020
Location: USA
Posts: 610
M.O.C. #25842
|
My generator in the back of the truck blocks my view of my 5th wheel entirely so I put a magnetic pickup tool at the front center of the 5th wheel plate. Works like a charm.
|
|
|
04-18-2021, 04:34 PM
|
#24
|
Montana Fan
Join Date: Jul 2019
Location: Mesa
Posts: 279
M.O.C. #24588
|
My preferred hitching method
Quote:
Originally Posted by mlh
I do this a little different. Your rear view mirror and the small slider window are in the center of your truck. Look in the rear view mirror and place your camper hitch in the center of your rear view mirror. Your camper hitch will be lined up with the hitch in the bed of your truck. As you get close make sure the camper is the right height and back up until it hitches. So you don’t need to see the hitch.
Lynwood
|
I'm driving my 5th F350 (2020) and have used Lynwood's method to line up with the pin box. You can also use the back seat head rests in lieu of the slider window as well. It's kinda like using a gun sight to lead you your target.
|
|
|
04-21-2021, 12:04 PM
|
#25
|
Seasoned Camper
Join Date: Oct 2019
Location: muskegon
Posts: 91
M.O.C. #25138
|
I can see my hitch so not a problem lining up. In regards to having it the right height I have a small bubble level screwed to the inside of the door my switch is in. When I raise the 5er to the point needed to unhitch I set that bubble so that it's level. Then when I'm ready to hitch up I just raise to that level back into the pin and I'm hooked
__________________
07 GMC CC LB dually LBZ, Idaho Rob EFI, DeeZee boards, 50 gal TransferFlow inbed tank
05 Mountaineer 298-RLS,
|
|
|
04-21-2021, 01:05 PM
|
#26
|
Montana Master
Join Date: Jan 2005
Location: North Ridgeville
Posts: 20,229
M.O.C. #2839
|
Who ever is not driving gets out and uses hand signals line the truck up.
|
|
|
04-21-2021, 01:13 PM
|
#27
|
Montana Master
Join Date: Jun 2018
Location: Folsom, California
Posts: 552
M.O.C. #21903
|
Quote:
Originally Posted by RMcNeal
I saw another camper who had put a 1" stripe on the pin box at the center of the pin and one on the top of the hitch with reflective tape of some sort.
|
I put white tape on the front center of my pin box as well as the hitch. I also have an short aluminum storage box between the hitch and tailgate. Put a dark color tape on top of box. Simply align hitch pin with tape on box, make sure the other tape lines up and I'm good!
|
|
|
04-21-2021, 01:20 PM
|
#28
|
Montana Fan
Join Date: Sep 2016
Location: Fargo
Posts: 214
M.O.C. #19032
|
EWAY WiFi Magnetic Hitch Wireless Backup Rear/Front View Camera Rechargeable Battery for Easy Hitching of Gooseneck Horse Boat Travel Trailer/Fifth Wheels/RV/Camper Reverse for iPhone iPad Android https://www.amazon.com/dp/B07Q7976P7/ref=cm_sw_r_cp_api_glt_fabc_7ZTD8A0CTD5K9Q12C1CS?_ encoding=UTF8&psc=1
|
|
|
04-21-2021, 01:23 PM
|
#29
|
Established Member
Join Date: Aug 2019
Location: Auburn, AL
Posts: 23
M.O.C. #24654
|
Quote:
Originally Posted by R.S.O'Donnell
My generator in the back of the truck blocks my view of my 5th wheel entirely so I put a magnetic pickup tool at the front center of the 5th wheel plate. Works like a charm.
|
Also put reflective tape straight down the middle of your pin box. Line up the magnetic pickup tool to the middle of the reflective tape and you hitch up first time ,every time.
__________________
Ron & Angie
2008 Ford F-350 DRW Crew Cab 6.4L Diesel
2019 Montana 3761FL 20th Anniversary Edition
|
|
|
04-21-2021, 01:27 PM
|
#30
|
Montana Master
Join Date: Jan 2016
Location: STAYTON
Posts: 1,118
M.O.C. #18157
|
Quote:
Originally Posted by Gubs
I'm sure I'm not the only one with this problem and sure someone has developed a simple method to remedy the situation.
I have a 2019 F-350 4x4 XLT short bed truck pulling a 2020 Montana 3121RL. Having a difficult time seeing the hitch and lining up the hitch pin to the jaws. Has anyone came up with a better idea than getting it close and then going back and looking several times to make sure the hitch jaws and the hitch pin are lined up correctly? I just cannot turn around and see it that good while sitting behind the wheel and backing up!! Guess I'm getting older plus my eye sight is not as good as it once was!!
|
Take the center headrest out and put it behind the seat. Then you'll be able to see your hitch and pin box.
I had the same problem.
Mark
|
|
|
04-21-2021, 01:30 PM
|
#31
|
Established Member
Join Date: Aug 2020
Location: Vancouver
Posts: 18
M.O.C. #26885
|
I had a similar problem because my Tonneau cover. Did not unfold enough where I can see my fifth wheel. I put a piece of orange duct tape on the pin box as well as on the part of the Tano cover I could see. That said since then I have got a fifth wheel tailgate and just aimed directly in the middle of it
|
|
|
04-21-2021, 01:51 PM
|
#32
|
Established Member
Join Date: Dec 2018
Location: Merrill
Posts: 22
M.O.C. #23192
|
Ford F350 crew cab
Does your truck have a tailgate camera? If so, lay a piece of orange surveyers tape or a long extension pole on the ground extending from tje front of the front cargo door to abour 5 feet past from of kingpin, centering it from side to side. You'll be able to see the marker on the ground with the camera and stay centered. Once you know one time when the pin hits the hitch you'll know how far under the kingpin to put your marker.
|
|
|
04-21-2021, 01:54 PM
|
#33
|
Established Member
Join Date: May 2020
Location: Manchester
Posts: 19
M.O.C. #26306
|
Quote:
Originally Posted by Gubs
I'm sure I'm not the only one with this problem and sure someone has developed a simple method to remedy the situation.
I have a 2019 F-350 4x4 XLT short bed truck pulling a 2020 Montana 3121RL. Having a difficult time seeing the hitch and lining up the hitch pin to the jaws. Has anyone came up with a better idea than getting it close and then going back and looking several times to make sure the hitch jaws and the hitch pin are lined up correctly? I just cannot turn around and see it that good while sitting behind the wheel and backing up!! Guess I'm getting older plus my eye sight is not as good as it once was!!
|
I have a 2017 F350 SRW Lariat. I only had a factory backup camera on my tailgate so I had a local accessory shop install a camera under my cargo light. It works great I can see my fifthwheel hitch perfectly fine with no problems. I think you can get a monitor for the cab if you don’t have a factory camera installed.
|
|
|
04-21-2021, 02:10 PM
|
#34
|
Montana Master
Join Date: Jun 2020
Location: Qualicum Beach
Posts: 665
M.O.C. #26399
|
Quote:
Originally Posted by Gubs
I'm sure I'm not the only one with this problem and sure someone has developed a simple method to remedy the situation.
I have a 2019 F-350 4x4 XLT short bed truck pulling a 2020 Montana 3121RL. Having a difficult time seeing the hitch and lining up the hitch pin to the jaws. Has anyone came up with a better idea than getting it close and then going back and looking several times to make sure the hitch jaws and the hitch pin are lined up correctly? I just cannot turn around and see it that good while sitting behind the wheel and backing up!! Guess I'm getting older plus my eye sight is not as good as it once was!!
|
I just look in the trucks rear view mirror and watch the hitch and pin in the mirror on the front of the trailer (I think they are on all Montana's). The only thing I don't like with that arrangement is the pin has to be fairly close to see it in the mirror and I can't correct fast enough.
__________________
2018 Keystone Montana 3811MS
2017 Ford F450 diesel dually
600AH Battle Born Lithium Batteries, 1,080 watts solar
3,000 watt hybrid inverter with 120A charger
|
|
|
04-21-2021, 02:16 PM
|
#35
|
Seasoned Camper
Join Date: Sep 2017
Location: Lake Havasu City
Posts: 93
M.O.C. #20488
|
I posted a solution a few years back when I had the same problem. My solution was a backup camera (7")(5" to small) attached to my visor. I attached a wireless 12v camera to my cargo bed light. I put a white stripe on my Hitch and rig. When backing up, I plug in my screen, turn on my cargo light camera. I have a clear view into my deck and hitch. I bought the camera and screen at Amazon. I has worked excellent. Hope this could help you
__________________
Odd Job Al
2012 Montana Mountaineer 295RKD
2006 Dodge Megacab 2500 5.9 Diesel
|
|
|
04-21-2021, 02:23 PM
|
#36
|
New Member
Join Date: Jun 2020
Location: Whittier
Posts: 9
M.O.C. #26378
|
There is no fool proof way I say:
I have a great bed camera (Ford F350with ultimate camera opt.) which does allow me to get lined up well. I have a wife who does her best but I am in charge of a mishap so.... when I think I am close, I get out and check it all out. First thing I'm checking is the alignment (with the camera I'm usually right on). More importantly I'm looking for hitch height to be correct. I just have to get out and check things for myself. jmo mark
__________________
Mark and Connie
2020 295RL and 2019 F250 gas with camper pkg
|
|
|
04-21-2021, 02:41 PM
|
#37
|
Seasoned Camper
Join Date: Sep 2017
Location: Lake Havasu City
Posts: 93
M.O.C. #20488
|
not always the best idea
Quote:
Originally Posted by richfaa
Who ever is not driving gets out and uses hand signals line the truck up.
|
We were traveling with some people. My wife decided to have my cousin back me up. I showed him the hand signals that I liked. Backing up and looking in the mirror, I saw this person flailing around like one of the blow up characters you see in front of stores. . I had my wife do it. Then put in my back up camera for the deck
__________________
Odd Job Al
2012 Montana Mountaineer 295RKD
2006 Dodge Megacab 2500 5.9 Diesel
|
|
|
04-21-2021, 02:46 PM
|
#38
|
Established Member
Join Date: Apr 2019
Location: O'Fallon
Posts: 38
M.O.C. #23886
|
EyeBall
I bought a magnetic mounted video camera and place it where it shows me my alignment. It has a small monitor for the cab. It was on Amazon and is called EyeBall
I also put a strip of reflective tape at the right spot to help make it easier to see. That handles forward and reverse. I have a magnetic rod to mark right and left. One person hook up is a breeze.
|
|
|
04-21-2021, 03:02 PM
|
#39
|
Seasoned Camper
Join Date: Oct 2019
Location: muskegon
Posts: 91
M.O.C. #25138
|
I can see where more attention is needed if coming into it at an angle. But otherwise if you have the truck centered on the trailer using both side mirrors it should line up fine. This is the way I hitch up my bumper pull car trailer by myself. Do I have to get out sometimes to check? Of course but usually not more than twice and that's for having the ball directly under the coupler
__________________
07 GMC CC LB dually LBZ, Idaho Rob EFI, DeeZee boards, 50 gal TransferFlow inbed tank
05 Mountaineer 298-RLS,
|
|
|
04-21-2021, 06:05 PM
|
#40
|
Established Member
Join Date: May 2018
Location: Slidell
Posts: 14
M.O.C. #21758
|
Cheap solution that works for me every time
Place plastic water bottle in hitch and guide it to center of
Kingpin.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|